Table of Contents
Advertisement
2.3 GENERAL OPERATION
2.3.1 POWER STATUS
●
During operation, the Power Statuas indicator will indicate the amount of battery power that is remaining.
The battery should be recharged when RED is shown.
●
During charging, the Power Statuas indicator will indicate the amount of battery power that has been
charged to the battery. When the battery is fully charged the GREEN LED will immediately switch off.
●
In the event that the battery storage switch is OFF, it is not possible to charge the battery. In this case, when
the mains power is connected to the fixture, the Power Statuas indicator will show GREEN for 30 seconds and
then fade out. This shows that electrical contact has been made between the lighting fixture and the battery
charging system. The Battery Storage Swicth must be ON in order to charge the battery.
●
In order to check the current status of the battery, the battery charging system should be turned OFF. The
fixture can then be turned ON using the EVENT ON/OFF button and the Power Statuas can be checked.
2.3.2 ON/OFF SWITCH
●
Press the SWITCH ON/OFF button for 3 seconds to turn on/off lighting fixture (when BATTERY SWITCH is ON)
●
SWITCH ON/OFF button indicator LED when showing constant RED indicates lighting fixture is power ON ( when slowly
flashing indicates that DMX data is successfully received)
2.4 OTHER OPERATIONS
2.4.1 ANTENNA RELEASE
● When releasing support antenna with hand
2.4.2 BATTERY SWITCH
●
ON for operation/charging
●
OFF for storage (>7 days)
●
OFF for maintenance
● Always use the Battery Switch when storing for more than 7 days
● Battery Switch must be ON for operation and charging
ON/OFF Switch
Zoom Knob
IR Receiver
Power Status
1
2
3
·4·
GREEN: >70%
YELLOW: >20%
RED: EMPTY
POWER ON/OFF
100~220V AV CHARGING INPUT
DISPLAY
Advertisement
Table of Contents
