Table of Contents
Advertisement
3.
Slide the left speaker' s power switch up to the ON position to turn on the
speakers. If the effects switch is in the ON position (see Using the Speaker' s
Integrated Controls), the speakers' lights and jets will activate.
Connecting Your Audio Device
1.
If your audio device is turned on, make sure that it is not playing and that the
volume is turned all the way down.
2.
Use the included audio cable to connect your audio device' s 3.5 mm headphone
jack or audio output connection to the left speaker' s 3.5 mm audio input
connection.
3.
Turn on your audio device and press PLAY. Use a combination of your device' s
volume controls and the speaker' s built-in volume controls until the audio
reaches a desirable level. As you increase the volume, the liquid will dance higher.
Using the Speaker' s Integrated Controls
The left speaker has onboard controls that let you adjust the volume and
■ ■
activate the lights and jets.
Use the volume buttons to adjust the volume of the speakers. This is useful
■ ■
when your audio device is out of reach.
To turn on the lights and jets, slide the effects switch up to the ON position. To
■ ■
turn them off, slide the effects switch down to the OFF position.
Advertisement
Table of Contents
