Radio Operation - jWIN JX-M133 Instruction Manual

AM/FM/Weather band Radio w/ Dual Alarm Clock
OPERATIONAL INSTRUCTIONS
Activating the Alarm
1. To activate the alarm, set the
your desired position. The clock face icon will appear.
2. When the alarm sounds, press the
The alarm will sound again in seven (7) minutes.
POWER
3. Press the
activated at next day same time.
4. To turn the alarm off completely, set the
radio to "OFF" position.

Radio Operation

1. To turn on the radio by press the
2. Adjust the desired volume level by press the
level will show on the right corner of the display.
3. Select the preferred band (AM/FM) by pressing the
4. Tune manually to a radio station. The LCD will display the frequency of the
received station.
•
Manual tuning: Press the
•
Auto scan: Press and hold the
seconds.
5. Adjust the antenna to get optimal effect.
6. To turn off the radio by press the
Radio Presetting
1. Turn on the radio and tune a station you want to store.
MENU
2. Press the
UP
3. Press the "
SELECT
4. Press the
5. Repeat above 2-4 steps to store other frequencies.
Note: Total 20 FM frequencies and 10 AM frequencies can be stored.
Using Preset Stations
1. Turn on the radio and change the AM of FM band pressing the
button.
UP
2. Press the "
AL1/AL2/AL1+2
SNOOZE
button to turn off the alarm temporarily, alarm will be
AL1/AL2/AL1+2
POWER
<
LEFT " " or RIGHT "
LEFT "
POWER
button, the "MEMORY 01" will display on the LCD screen.
DOWN
" or " " button to select a station to be stored.
button to store current frequency in unit memory.
DOWN
" or " " button to select the preset stations.
V10M10_IM_EN_06022009
switch on side of the radio to
button on the top of the radio.
switch on side of the
button.
VOLUME +/-
button, the volume
RADIO AM/FM
>
"
buttons.
< >
" or RIGHT " "
buttons for two (2)
button again.
RADIO AM/FM
www.jWIN.com
button.