Subscribe to Our Youtube Channel
Related Manuals for VideoComm Technologies MX-5842c
Summary of Contents for VideoComm Technologies MX-5842c
- Page 1 MXR-5842-47 Series Manual Rev. B 2007 # MX-5842c # MXR-5842c # MX-5842bw # MXR-5842bw # MX-5847VF # MXR-5847VF 5.8GHz Wireless Camera Series It’s About Real-Time OWNER’S MANUAL...
-
Page 2: Table Of Contents
II. In order to comply with the FCC/IC adopted RF exposure requirements, this transmission system will be installed by an authorized professional installer of VideoComm Technologies. Installation of all antennas must be performed in a manner that will provide at least 23cm clearance from the front radiating aperture, to any user or member of the public. -
Page 3: Introduction
• Low current consumption for convenient battery operation • Range up to 300 feet indoors • One Year Limited Warranty • RoHS compliant models available upon request. • Ideal for portable, temporary and covert surveillance or monitoring applications VideoComm Technologies... -
Page 4: Parts List
5.8GHz Color VariFocal Camera Please inspect the contents carefully to ensure you have received all parts and accessories listed. If parts are missing or damaged, contact VideoComm Technologies Customer Service or your re-seller immediately. 5.8GHz Color Pinhole Camera 5.8GHz B&W Pinhole Camera 9VDC Power Supply –... -
Page 5: System Setup
6. Adjust camera focus as required 7. Do Not bend the black part of the antenna Wireless operation from Battery power source is dependant on type and quality of batteries. Call Tech Support for suggestions. Only use a VideoComm Technologies power supply. Model # PS-9300mx. -
Page 6: Channel Selection
MXR-5842-47 Series Manual Rev. B 2007 Channel Selection 1. Set the desired channel by turning the rotary switch 2. This can be done with a small flat-head screw driver or with your fingers. 3. Do not push in the rotary switch knob, permanent damage can occur. 4. -
Page 7: Receiver Setup
4. The receiver must be set to the same channel as the camera. 5. Connect video cable from receiver output connector to monitor source 6. We strongly recommend that you do not adjust the video gain adjustment without first consulting a member of the VideoComm Technologies Tech Support Team. RCA-Female RCA-Female 2.1mm Barrel... -
Page 8: Camera Bracket Mounting - Ceilling
MXR-5842-47 Series Manual Rev. B 2007 Camera Bracket Mounting - Ceilling We recommend confirming system setup for power, channel selection and video picture before permanently mounting the camera with the supplied bracket. 1. Mount the camera U-type bracket in the desired ceiling location using two screws – ( Not included ) We recommend using wall plugs to support the weight of the camera. -
Page 9: Camera Bracket Mounting - Wall
MXR-5842-47 Series Manual Rev. B 2007 Camera Bracket Mounting - Wall We recommend confirming system setup for power, channel selection and video picture before permanently mounting the camera with the supplied bracket. 1. Mount the camera U-type bracket in the desired location using two screws – ( Not included ) We recommend using wall plugs to support the weight of the camera. -
Page 10: Tips & Trouble Shooting
MXR-5842-47 Series Manual Rev. B 2007 TIPS & TROUBLE SHOOTING Things that block transmission Things that block transmission are not always obvious. Consider any obstruction that may get in the way or reduce the wireless signal strength along the way. Here are some of the most common pitfalls: •... -
Page 11: Specifications
MXR-5842-47 Series Manual Rev. B 2007 SPECIFICATIONS Camera Operating Frequency 5.725GHz – 5.875GHz, 8 User Selectable Channels Receiver Operating Frequency 5.725GHz – 5.875GHz, 8 User Selectable Channels RF Radiated Power 50mV/m @ 3m Range (Line-of-Sight) Up to 1,000 feet Line-of-Sight / 300 feet indoors Transmitter Antenna Type 0dB Fixed OmniDirectional Receiver Antenna Type... -
Page 12: Warranty Information/ Terms & Conditions
MXR-5842-47 Series Manual Rev. B 2007 WARRANTY INFORMATION/ TERMS & CONDITIONS VideoComm Technologies, herein referred to as “VCT.” LIMITED WARRANTY VCT hereby warrants, subject to the conditions here in below, that should this product become defective by reason of improper workmanship or material defect during the specified warranty period, VCT will repair the same, effecting all necessary parts without charge for either parts or labor, or replace the unit at VCT option.
Need help?
Do you have a question about the MX-5842c and is the answer not in the manual?
Questions and answers