Operation - Universal Trade Supplies CPL 60 Instruction Manual

Instruction Manual for Planetary Mixer TM60B

3.3 Operation

• Place the ingredients in the bowl with the appropriate attachment.
• Place the bowl in the cradle being sure to locate the bowl lug into the position on the
cradle and lock the bowl with the lock wings.
• Slide the attachment up on the shaft and turn it until the drive pin in the shaft reaches
the L-Shaped slot in the attachment shank.
• Raise the bowl using the hand wheel, ensuring that the bowl is fully raised.
• Close the safety guard completely.
• Select appropriate gear speed and press the green start button (Fig 3.1, b).
• The machine will now operate until the emergency stop button is pressed, the safety
guard is opened or the bowl is lowered.
• When changing gears, open the safety guard to stop the machine, change to the new
speed, close the guard and press the green start button (Fig 3.1, b) to recommence
machine operation.
Note:
Machine must be stopped before changing speeds, failure to do so could result in
damaging the machine and voiding warranty.
www.universal tradesupplies.com 15