Joy Sport Experience User Manual page 20

Step 6: Loose the adjusting screw (13), and insert the fixup pipe (18) to the top square pipe of
main support (4), then choose the right height and fasten. Refer to the following Fig.
Step 7: Assemble the gripe(19) to fixup pipe by using 6mm Hexagonal Spanner, M10X22
Hexagonal Screw(20) with M10 flat mats(2).As the following Fig。
Step 8: Turn the adjusting screw (13),and insert the seat stand pipe (10) to the main support
(4), and screw down the adjusting screw (13). Before adjusting the height, make sure the
adjusting screw (13) is loose, and then choose the right height between gripe and seat support
pipe, and fix the adjusting screw (13). As per the following Fig.