① PAIR
Your MOTOROKR T505
Before you can use your MOTOROKR T505, you must pair (link) it with your
Bluetooth device.
Step A - ENSURE T505 IS IN PAIRING MODE
1 Verify any Bluetooth devices previously paired with your T505 are turned off.
2 Power on your T505 by pressing and holding the Power button for
approximately three seconds. The main indicator light flashes and you hear
an audible tone sequence to indicate the device is powered on.
After a few moments, the main indicator light will be steadily lit to indicate
T505 is in pairing mode.
If your T505 is not pairing mode, see TROUBLESHOOTING for help.
Main Indicator Light
(steadily blue
for pairing mode)