Advertisement
Quick Links
Each ClaraVu speaker is hand-built in the USA instead of coming off a factory line. Each is thoroughly
tested and comes with a 2-year warranty to the original owner.
The ClaraVu 7 Mk3 modular speaker system consists of a monitor speaker and a matching powered
subwoofer. They are perfect for apartment-size high-end systems, yet their big sound offers more than
satisfying performance in reference-level setups. A combination of 85 dB sensitivity and 8 ohm minimum
impedance means the ClaraVus are easily matched to a wide range of tube or solid state amplifiers.
The ClaraVu Mk3 speaker enclosures are available in three beautiful finishes: maple, cherry and gloss
piano black. The modular construction of the system means that you can buy the monitor speakers with
matching stands first, and then add the sub modules to make a full range system.
The ClaraVu 7 Mk3 monitor
and twin 6.5" paper cone woofers in a unique isobaric configuration. Two woofers are mounted one in
front of the other in a sealed paperboard tube inside a rigid cabinet. The same design is used in the
drivers of the sub module. This design minimizes vibration and standing waves and results in the
ClaraVu's high-resolution and extreme musicality.
The ClaraVu 7 Mk3 speakers will show you a "clear view" into your music by capturing all the details and
nuances of the recording and performance.
SPECIFICATONS:
Monitor Speakers – Retail $5995/pair
Super-tweeter: ultra-low-mass ribbon tweeter
Tweeter: 1" silk dome using patented technology
Woofers: 2 custom drivers, 6.5" paper cone
Frequency Response: 45Hz-20KHz +/- 3dB
Impedance: 10 ohms nominal, 8 ohms minimum
Sensitivity: 85 dB
Recommended power: 30 watts
Dimensions: 22"h x 9"w x 15"d
Weight: 45 lbs. each
Cabinet finish - maple, cherry, and piano black
Stands – Retail $500/pair
Dimensions: 27"h x 13"w x 14"d
Weight: 38 lbs each
Finish: Gloss Piano Black
ClaraVu™ 7 Mk 3 Modular Speaker System
Thank you for purchasing Gingko Audio's ClaraVu 7
Mk3 speaker system.
These striking speakers are a result of 10 years of intensive
research and development. Each speaker is hand crafted in
the USA using the finest parts in the world. Custom drivers,
high-quality caps and coils, OCC copper cabling and unique
cabinet construction result in superlative resolution and
musicality.
is
a three-way speaker using a ribbon super-tweeter, 1" soft dome tweeter
Powered Sub Modules – Retail$1500each
Woofers: 2 custom drivers, 6.5" paper cone
Sub amp: 75w into 8 ohms, 100w/ into 4 ohms
Options for hookup: low-level via interconnects or
high-level via speaker wires
Adjustments: Volume, Crossover frequency, Phase
Sensitivity: 85 dB
Weight: 48 lbs. each
Cabinet finish - maple, cherry, and piano black
1
GINGKO AUDIO
Owner's Manual
Advertisement
Related Manuals for Gingko Audio ClaraVu 7 Mk3
Summary of Contents for Gingko Audio ClaraVu 7 Mk3
- Page 1 This design minimizes vibration and standing waves and results in the ClaraVu’s high-resolution and extreme musicality. The ClaraVu 7 Mk3 speakers will show you a “clear view” into your music by capturing all the details and nuances of the recording and performance.
- Page 2 Set Up tips for best performance We highly recommend the matching stands for the ClaraVu Mk3 monitors. They complete the elegant streamlined look that can be proudly displayed in any décor and place the speakers at optimum height. You can add the sub modules when you want to upgrade to a full range system. The following instructions refer to setup for a full range system.
- Page 3 high-quality. The subs get half of the cables which may be overkill, but it will provide the best bass performance. But biwire speaker cables tend to cost more. Third best: Speaker cables to the monitors and low-level signal via a pair of unbalanced (RCA) interconnects from preamp outputs to the sub modules.
- Page 4 8 Nicklaus Lane Farmingdale, NJ 07727 Should your ClaraVu 7 Mk3 ever need warranty or repair service, please contact us by calling 732-946-9439 or send an email to gingko@gingkoaudio.com. Do not attempt to repair the speakers yourself as it will void the warranty. Make sure you obtain a Return Authorization Confirmation before sending the speakers back to us.