Switching The Appliance On; Setting The Temperature; Operating Tips - Siemens KG..E Series Instructions For Use Manual

Fridge-freezer
Hide thumbs Also See for KG..E Series:
Table of Contents

Advertisement

en
8
Temperature display refrigerator
compartment
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
9
"Super" button refrigerator
compartment
Switches super cooling on and
off.
Switching
the appliance on
Fig. 2
1. Switch on the appliance with the On/
Off button 1.
A warning signal sounds,
the temperature display 4 flashes and
the alarm button 5 is lit.
2. The warning signal is switched off by
pressing the alarm button 5.
The appliance begins to cool. Light is
switched on when the door is open.
The factory has recommended
the following temperatures:
Refrigerator compartment: +4 °C
Freezer compartment: -18 °C

Operating tips

When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
8
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 7 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 8.
Freezer compartment
The temperature can be set from -16 °C
to -24 °C.
Keep pressing temperature setting
button 3 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 4.

Advertisement

Table of Contents
loading

Table of Contents