Samsung BD-D5300 User Manual page 60

Blu-ray disc player
Hide thumbs Also See for BD-D5300:
Table of Contents

Advertisement

Appendix
PROBLEM
Forgot password
If you experience other problems.
The picture is noisy or distorted
No HDMI output.
Abnormal HDMI output screen.
AllShare function
I can see folders shared through AllShare,
but I cannot see the files.
Video is played intermittently.
AllShare connection between TV and PC is
unstable.
60
English
STOP (
Press the
) button (on front panel) for more than 5 seconds with
no disc inside. All settings including the password will revert to the factory
settings.
Don't use this unless absolutely necessary.
When the factory default settings are restored,
deleted.
Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
Make sure that the disc is not dirty or scratched.
Clean the disc.
Check the connection between the TV and the HDMI jack of the player.
Check if your TV supports 576p/480p, 720p, 1080i, 1080p HDMI input
resolution.
If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
AllShares shows only
files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories may not be
displayed.
Check if the network is stable.
Check if the network cable is properly connected and if the network is not
overloaded.
The wireless connection
between the DLNA compatible device and the
player is unstable.
Check the connection.
The IP
address under the same subnetwork should be unique. If they are
not, IP interference can cause this phenomenon.
Check if you have a firewall enabled.
If so, disable the firewall function.
SOLUTION
all stored user BD data is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents