Installing The Microphone (Xav-64Bt Only); Pairing - Sony XAV-64BT Operating Instructions Manual

Installing the microphone (XAV-
64BT only)
To capture your voice during handsfree calling,
you need to install the microphone (supplied).
For details on how to connect the microphone,
refer to the supplied "Installation/Connections"
guide.

Pairing

Pairing is required only the first time you connect
to a Bluetooth device (cellular phone, etc.).*
To pair this unit to a Bluetooth device, you need
to enter the same passkey*
the Bluetooth device. The passkey can be either
your own selected number or the number
determined by the Bluetooth device. For details,
refer to the manual of the Bluetooth device.
*1 If you delete the device registration from this unit
by initializing, you need to perform pairing again.
*2 Passkey may be called "passcode," "PIN code,"
"PIN number," "password," etc., depending on the
Bluetooth device.
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch "BT Phone" in the top menu.
To select Bluetooth Audio, touch "Source
List," then "BT Audio."
2
Touch "BT Menu."
In the case of Bluetooth Audio, touch "Play
Menu," then "BT Menu."
The Bluetooth setting menu appears.
Back ATT
BT Menu
Signal
Pairing
Auto Answer
Ringtone
EC/NC Mode
3
Touch "Pairing."
Pairing starts.*
* If the Bluetooth signal of this unit is off, it
activates automatically when pairing starts.
32
1
2 on this unit and on
Top
OFF / ON
OFF
1/2
Default / Cellular
Mode 1 / Mode 2
4
Operate the Bluetooth device to
search for this unit.
A device list appears on the display of the
device. This unit is displayed as "Sony
Automotive."
DR-BT30Q
Sony
Automotive
XXXXXXX
5
If passkey* input is required on the
display of the device, input "0000."
XXXX
This unit and the Bluetooth device memorize
each other's information, and when pairing is
made, this unit is ready for connection to the
device.
6
Operate the Bluetooth device to
connect to this unit.
"Bluetooth device connected." appears and
connection is complete. "
when the connection is made.
Notes
• While connecting to a Bluetooth device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
• It may take time to pair or connect.
• Depending on the device, the confirmation display of
the connection appears before inputting the
passkey.
• The time limit for inputting the passkey differs
depending on the device.
• This unit cannot be connected to a device that
supports only HSP (Head Set Profile).
Input passkey.
"0000"
" or " " appears