Basic Operations; Starts; Reboot; Login - IDENTIVISION IIP IIP-L3100F Installation Manual

Megapixel security cameras justicia series robot series alligator series ip outdoor ip outdoor cameras with ir led (3mp - 5mp) triton series penta series alligator series ip outdoor cameras with ir led (3mp - 5mp) snowball series ufo series shark seri
Table of Contents

Advertisement

4. Basic operations

4.1 Starts

Connect the power supply to the camera, after this the IP camera will start automatically.
Note:
Make sure that the input voltage corresponds with the switch of the IP Camera power supply.
Power supply demands: 220V ± 10% / 50Hz.
We recommend to use an UPS to protect the power supply.

4.2 Reboot

To reboot the camera there are two methods:
Software (in menu): Choose in the menu the reboot option and press OK.
Hardware: Break off or turn off the power supply and reconnect it.
Note:
Turn off and recovery function:
If IPC shuts down abnormally, when it is under recording, after reboot, it wills auto-save the record info before shutdown
and restore the status before shutdown.
Replace the SD card:
When you replace the SD card, please first of all disconnect the power supply.
Replace the battery:
The IP camera is working with button battery. Please regularly check the system time, because if the time is
not correct, the battery should be replaced.We recommend to replace the battery in every year with the same
battery type by a adequate maintenance. (only this model:

4.3 Login

When the camera turns on normally, need to log-in before the operation.
The picture of the camera can be accessed by every type of browser, but the settings adjustment works only with
Internet Explorer 8 and 9. If you would like to use the Chrome Browser to adjustment the settings, first of all install
the IETab plugin from the CD. The other way to acces the settings menu is to manage the camera through the
CMS program.
Default IP address:192.168.1.10
Subnet mask:255.255.255.0
Default gateway:192.168.1.1
3 deafult profil: admin, gues, default
There is no default password, the admin is the super authorized user at default. For the guest and the default
login are enabled to use the preview and play functions. The admin and the guest can modify the password, but
the permissions not. By default the default login can change the authorization, but the password not.
Product specifications, parameters, functions of the device can change without notice!
IDENTIVISION Megapixel camera installation guide
IIP-CB3100FWL).
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents