Sanyo RCS KR1 EG Instruction Manual
Sanyo RCS KR1 EG Instruction Manual

Sanyo RCS KR1 EG Instruction Manual

Control system for spw air conditioner system's

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Sanyo RCS KR1 EG

  • Page 2: Simplifi Ed Remote Controller

    Control of 3-WAY ECO-i SYSTEM 6. Simplifi ed Remote Controller Simplified Remote Controller / RCS-KR1EG 1. Important Safety Instructions Before using the system, be sure to read these "Important Safety Instructions". After reading this manual, save it in a convenient place. Warning * Installation Precautions 1.
  • Page 3: Remote Controller View And Buttons

    Control of 3-WAY ECO-i SYSTEM 6. Simplified Remote Controller 2. Names and Operations Operation Section (Start/Stop)button Pushing this button starts, and pushing again stops the unit. (Temperature setting) buttons Changing the temperature setting. (Mode Select) button Pushing this button to select an operation mode.
  • Page 4: Remote Controller Display

    Control of 3-WAY ECO-i SYSTEM 6. Simplifi ed Remote Controller Display Section (Fan mode select) (Centralized control) indication indication Appears when operated in centralized control. The selected fan mode is displayed. If the remote control operation is not permitted to the remote unit, when the (Start/Stop) (Flap position) indication button,...
  • Page 5 Control of 3-WAY ECO-i SYSTEM 6. Simplified Remote Controller 3. Outing Function Outing function is a function that prevents the room temperature from increasing too much (or decreasing too much) when no one is in the room. An air conditioner works automatically if this function is set effective. General Performance of the Outing Function Outing function COOL / DRY...
  • Page 6 Control of 3-WAY ECO-i SYSTEM 6. Simplified Remote Controller 4. Basic Installation Parts supplied with simplified remote controller Simplified remote Wood screws Binding strap Instruction manual Installation manual controller Simplified remote controller installation guidelines (Place of installation) 1. Mount the simplified remote controller at a height of 1 to 1.5 meters above the floor where it can sense the average temperature of the room.
  • Page 7 Control of 3-WAY ECO-i SYSTEM 6. Simplifi ed Remote Controller How to wire the simplified remote controller Connection diagram Terminal block Simplified for wiring remote the remote controller controller of the indoor unit Wiring for simplified remote controller (supplied locally) *1: Use 0.5 mm to 1.25 mm stranded wires.
  • Page 8: Remote Controller Setting Mode

    Control of 3-WAY ECO-i SYSTEM 6. Simplifi ed Remote Controller Remote controller setting mode Use the following method to perform simplified remote controller Main/Sub setting and RCU.CK switching. Press both buttons on the remote controller for more than 4 seconds together. ) button to select an item code, and then use button to confirm.

Table of Contents

Save PDF