Canyon CNP-WF518N3 Quick Manual

Wireless usb adapter

Advertisement

Article: CNP-WF518N3

Package Contents

CANYON CNP-WF518N3 Main Unit
1.
Driver CD
2.

Hardware Overview

USB Connector

Connecting to Device

Installing Device Driver

NOTE:
Please click on Ok when prompted to install Unsigned Driver. This is a
Windows system warning that indicates the specific driver program is not
certified by Windows.
1.
After inserting Driver CD, click on Setup.exe to launch driver
installation process.

Wireless USB Adapter

Quick Guide v1.0
Status LED
Indicator
Quick Guide
3.
Warranty Card
4.
1.
Power on PC.
2.
Insert the device into an USB
2.0 slot.
3.
Insert Driver CD into
CD-ROM to start driver
installation.
NOTE:
It is recommended to install driver
from Driver CD for full functionali-
ties.
EN - 1
WPS Button

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CNP-WF518N3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Canyon CNP-WF518N3

  • Page 1: Wireless Usb Adapter

    Wireless USB Adapter Quick Guide v1.0 Article: CNP-WF518N3 Package Contents CANYON CNP-WF518N3 Main Unit Quick Guide Driver CD Warranty Card Hardware Overview WPS Button Status LED USB Connector Indicator Connecting to Device Power on PC. Insert the device into an USB 2.0 slot.
  • Page 2: Connecting To Wireless Network

    Click on the language desired. Click on Next to continue or Cancel to exit setup. Click on Next again to continue or Cancel to exit setup. Click on Install to start driver installation process or Back to return to previous page. Click on Cancel to exit setup. The installation process may take up to a few minutes to finish.
  • Page 3 Type in security settings as required by network connection. Click on OK to complete connection process or Cancel to exit. Using Configuration Utility Click on the Start Control Panel and then click on Network and Internet option. Click on Connect to a network option under Network and Sharing Center title.
  • Page 4 Click on the wireless access point desired for connection. Click on Connect to continue or Cancel to exit. Type in SSID/Passphrase of wireless access point if prompted. The input name must be identical to the settings of wireless access point connecting to.

Table of Contents