Table of Contents
Advertisement
Quick Links
USE, INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR BUILT-IN HOT PLATES
Dear Customer
Thank you for purchasing a Eurostyle Cooktop.
Before we continue telling you about this cooktop, we cordially invite you to become part of the Eurostyle family by
subscribing to ongoing information and invitations.
You will find that the clean lines and modern look of your Eurostyle Cooktop blends perfectly with your kitchen
décor. It is easy to use and performs to a high standard.
There are models to complement your new Eurostyle Cooktop.
Of course we make every effort to ensure that our products meet all your requirements, and our Customer
Relations department is at your disposal, to answer your questions and to listen to all your suggestions (see back
cover of manual).
Please complete the warranty section of this manual and keep your receipt as proof of purchase. Retain all
documents relating to the purchase of this products.
Eurostyle is committed to providing increasingly efficient products that are easy to use, respect the environment
and are attractive and reliable.
Eurostyle
We ask that you carefully read the instructions within this booklet to enable you to abtain quality results from the outset.
The appliance must be installed only by an authorised person in compliance with the instructions provided. The manufacturer
declines all responsability for improper installation which may harm persons and animals and damage property.
The appliance must be used for the purpose for which it was expressly designed. Any other use (eg heating rooms) is considered to
be improper and consequently dangerous. The manufacturer declines all responsability for damage resulting from improper and
irresponsible use.
The manufacturer shall not be held responsible for any inaccuracies in this handbook due to printing or transcription errors. The
designs in the figures are purely indicative.
The manufacturer also reserves the right to make any modifications to the products as may be considered necessary, useful or in the
interests of the user, without jeopardizing the main functional and safety features on the products themselves.
If your cooktop requires service, please contact your local customer service centre or your nearest Eurostyle agent listed at the back
of this booklet.
MODELS: EGZ90GS - EGZ90FCTSX
COD. 04017HM -11. 05.2012
Advertisement
Table of Contents
Related Manuals for EURO EGZ90GS
Summary of Contents for EURO EGZ90GS
- Page 1 Eurostyle MODELS: EGZ90GS - EGZ90FCTSX We ask that you carefully read the instructions within this booklet to enable you to abtain quality results from the outset. The appliance must be installed only by an authorised person in compliance with the instructions provided. The manufacturer declines all responsability for improper installation which may harm persons and animals and damage property.
- Page 2 DESCRIPTION OF THE HOT PLATES MODEL: EGZ90GS MODEL: EGZ90FCTSX Natural U-LPG Ultra rapid gas burner/Wok 14.5 MJ 11.4 MJ Rapid gas burner 12.0 MJ 10.4 MJ Semi-rapid gas burner 7.1 MJ 6.2 MJ Auxiliary gas burners 4.1 MJ 3.5 MJ Fish gas burner 12.0 MJ...
- Page 3 1) BURNERS - When the pan comes to the boil, set the knob to the reduced rate position (small flame fig. 1). A diagram is screen-printed above each knob on - Always place a lid on the pans. the front panel. This diagram indicates to which Burners Power ratings Pan Ø...
- Page 4 Notes: use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The room must therefore be well ventilated by keeping the natural air vents clear (fig. 3) and by activating the mechanical aeration device (suction hood or electric fan fig. 4 and fig. 5). Intensive and lengthy use of the appliance may require additional ventilation.
- Page 5 CLEANING IMPORTANT: In the event whereby persistant sparks appear: always disconnect the appliance from the gas immediately clean affected areas with stainless and electricity mains before carrying out any steel cleaner, using a clean damp soft cloth. cleaning operation. Ensure surface is rinsed and thoroughly clean of all marks and cleaning agent.
-
Page 6: Installation
INSTALLATION TECHNICAL INFORMATION non-combustible material for a height of 150 mm for FOR THE INSTALLER the entire length of the hob. Any combustible construction above the hotplate must be at least This appliance shall be installed only by authorised personnel and in accordance with 600 mm above the construction above the top of the burner and no construction shall be within 450 the manufacturer’s installation instructions,... -
Page 7: Gas Connection
INSTALLATION 5) GAS CONNECTION Liquified Petroleum Gas In a LPG installation the gas regulation is made at The gas connection is located in the rear and on the the gas cylinder and regulation at the appliance is underside of the appliance 100 mm from the right hand side. -
Page 8: Electrical Connection
INSTALLATION 6) ELECTRICAL CONNECTION - The power supply cable must be positioned so that no part of it is able to reach an overtemperature of 75 K. IMPORTANT: the appliance must be - Never use reductions, adapters of shunts for connection since these could create false contacts installed following the manufacturer's and lead to dangerous overheating. - Page 9 ADJUSTMENTS 7) TAPS Always disconnect the appliance from the electricity main before making any adjustments. Our taps are suitable for all the gas, they are male All seals must be replaced by the technician at conical type at one way. the end of any adjustments or regulations.
- Page 10 CONVERSIONS 8) U-LPG TO NATURAL GAS CONVERSION 9) NATURAL GAS TO UNIVERSAL PROCEDURE LPG CONVERSION PROCEDURE Appliance models: Gas stainless steel hotplate Appliance models: Gas stainless steel hotplate models: models: 1. Remove each burner cap and burner skirt. 1. Remove each burner cap and burner skirt. 2.
-
Page 11: Replacing The Injectors
CONVERSIONS 10) REPLACING THE INJECTORS affix the label corresponding to the new gas regulation on the appliance instead of the already The burners can be adapted to different types of gas existing one. This label is supplied in the packet by installing injectors suited to the type of gas containing the spare injectors. - Page 12 SERVICING Always turn off the electrical ignition before Greasing the taps (see fig. 17 - 18) proceeding with any servicing operation. If a tap becomes stiff to operate, it must be Servicing should be carried out only by immediately greased in compliance with the authorised personnel.
- Page 13 SERVICING CABLE TYPES AND SECTIONS TYPE OF TYPE OF SINGLE - PHASE HOT PLATE CABLE POWER SUPPLY Gas hot plate H05 RR - F Section 3 X 0.75 mm ATTENTION!!! If the power supply cable is replaced, the installer should leave the ground wire longer than the phase conductors (fig.
-
Page 14: Technical Assistance And Spare Parts
TECHNICAL ASSISTANCE AND SPARE PARTS Before leaving the factory, this appliance will have been tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel with the utmost care and attention.
Need help?
Do you have a question about the EGZ90GS and is the answer not in the manual?
Questions and answers