Table of Contents
Advertisement
Quick Links
USE, INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR BUILT-IN HOT PLATES
Dear Customer
Thank you for purchasing a Eurostyle Cooktop.
Before we continue telling you about this cooktop, we cordially invite you to become part of the Eurostyle family by
subscribing to ongoing information and invitations.
You will find that the clean lines and modern look of your Eurostyle Cooktop blends perfectly with your kitchen
décor. It is easy to use and performs to a high standard.
There are models to complement your new Eurostyle Cooktop.
Of course we make every effort to ensure that our products meet all your requirements, and our Customer
Relations department is at your disposal, to answer your questions and to listen to all your suggestions (see back
cover of manual).
Please complete the warranty section of this manual and keep your receipt as proof of purchase. Retain all
documents relating to the purchase of this products.
Eurostyle is committed to providing increasingly efficient products that are easy to use, respect the environment
and are attractive and reliable.
Eurostyle
MODELS: EGZ700FGS - EGZ70CTFGSX
We ask that you carefully read the instructions within this booklet to enable you to abtain quality results from the outset.
The appliance must be installed only by an authorised person in compliance with the instructions provided. The manufacturer
declines all responsability for improper installation which may harm persons and animals and damage property.
The appliance must be used for the purpose for which it was expressly designed. Any other use (eg heating rooms) is considered to
be improper and consequently dangerous. The manufacturer declines all responsability for damage resulting from improper and
irresponsible use.
The manufacturer shall not be held responsible for any inaccuracies in this handbook due to printing or transcription errors. The
designs in the figures are purely indicative.
The manufacturer also reserves the right to make any modifications to the products as may be considered necessary, useful or in the
interests of the user, without jeopardizing the main functional and safety features on the products themselves.
If your cooktop requires service, please contact your local customer service centre or your nearest Eurostyle agent listed at the back
of this booklet.
EGZ600FDS - EGZ60WCTSX
EPZ2GFFDS
OD. 04037HM - 11.05.2012
Advertisement
Table of Contents
Related Manuals for EURO EGZ700FGS
Summary of Contents for EURO EGZ700FGS
- Page 1 Eurostyle is committed to providing increasingly efficient products that are easy to use, respect the environment and are attractive and reliable. Eurostyle MODELS: EGZ700FGS - EGZ70CTFGSX EGZ600FDS - EGZ60WCTSX EPZ2GFFDS We ask that you carefully read the instructions within this booklet to enable you to abtain quality results from the outset.
- Page 2 DESCRIPTION OF THE HOT PLATES MODEL: EPZ2GFFDS MODEL: EGZ600FDS MODEL: EGZ70CTFGSX-EGZ700FGS MODEL: EGZ60WCTSX NATURAL U-LPG 1 Ultra rapid gas burner/WOK 14.5 MJ/h 11.4 MJ/h 2 Rapid gas burner 12.0 MJ/h 10.4 MJ/h 3 Semirapid gas burner right front 7.1 MJ/h 6.2 MJ/h...
- Page 3 1) BURNERS Power ratings A diagram is screen-printed above each knob on Burners Pan Ø in cm NATURAL U-LPG the front panel. This diagram indicates to which burner the knob in question corresponds. After 22 ÷ 24 Ultra rapid/WOK 14.5 MJ/h 11.4 MJ/h having opened the gas mains or gas bottle tap, light the burners as described below: 20 ÷...
- Page 4 Notes: use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The room must therefore be well ventilated by keeping the natural air vents clear (fig. 3) and by activating the mechanical aeration device (suction hood or electric fan fig. 4 and fig. 5). Intensive and lengthy use of the appliance may require additional ventilation.
-
Page 5: Preventative Maintenance
IMPORTANT: In the event where persistent marks appear: always disconnect the appliance from the gas immediately clean affected areas with stainless and electricity mains before carrying out any steel cleaner, using a clean damp soft cloth. cleaning operation. Ensure surface is rinsed and thoroughly clean of all marks and stainless steel cleaner. -
Page 6: Installation
INSTALLATION TECHNICAL INFORMATION Never leave the packacing materials (cardboard, FOR THE INSTALLER bags, polystyrene foam, nails, etc.) within children’s reach since they could become potential sources of This appliance shall be installed only by authorised danger. personnel and in accordance with the The measurements of the opening made in the top manufacturer’s installation instructions, local gas of the modular cabinet and into which the hot plate... - Page 7 INSTALLATION 4) FIXING THE COOKTOP - Fix the hob with the proper brackets “S” and fit the prominent part into the porthole “H” on the bottom; The hot plate has a special seal which prevents turn the screw “F” until the bracket “S” stick on the liquid from infiltrating into the cabinet.
-
Page 8: Gas Connection
INSTALLATION 5) GAS CONNECTION Natural Gas Natural Gas installations require the connection of The gas connection is located in the rear and on the a gas regulator at the appliance. This regulator is underside of the appliance 118 mm (for EH/60) from supplied with the appliance on purchase. -
Page 9: Electrical Connection
INSTALLATION 6) ELECTRICAL CONNECTION - The power supply cable must be positioned so that no part of it is able to reach an overtemperature of 75 K. IMPORTANT: the appliance must be - Never use reductions, adapters of shunts for installed following the manufacturer's connection since these could create false contacts and lead to dangerous overheating. - Page 10 ADJUSTMENTS 7) TAPS Always disconnect the appliance from the electricity main before making any adjustments. Our taps are suitable for all the gas, they are male All seals must be replaced by the technician at conical type at one way. the end of any adjustments or regulations.
-
Page 11: Conversion Procedure
CONVERSIONS 8) U-LPG TO NATURAL GAS 9) NATURAL GAS TO U-LPG CONVERSION PROCEDURE CONVERSION PROCEDURE 1. Remove each burner cap and burner skirt. 1. Remove each burner cap and burner skirt. 2. Remove the U-LPG main injector with a 2. Remove the Natural Gas main injector with a 7 mm/VF tube spanner and replace with the 7 mm/VF tube spanner and replace with the appropriate size Natural Gas main injector for... -
Page 12: Replacing The Injectors
CONVERSIONS 10) REPLACING THE INJECTORS burners must be regulated as explained in paragraphs 7. The technician must reset any The burners can be adapted to different types of seals on the regulating or pre-regulating devices. gas by mounting injectors suited to the type of gas The envelope with the injectors and the labels can in question. -
Page 13: Components Replacement
SERVICING WARNING: Greasing the taps (see fig. 20 - 21) servicing should be carried out only by If a tap becomes stiff to operate, it must be authorised personnel. immediately greased in compliance with the following instructions: 11) COMPONENTS REPLACEMENT - remove the tap. - Page 14 SERVICING CABLE TYPES AND SECTIONS TYPE OF TYPE OF SINGLE - PHASE HOT PLATE CABLE POWER SUPPLY H05 RR - F Section 3 X 0.75 mm Gas hot plate ATTENTION!!! If the power supply cable is replaced, the installer should leave the ground wire longer than the phase conductors (fig.
-
Page 15: Technical Assistance And Spare Parts
TECHNICAL ASSISTANCE AND SPARE PARTS Before leaving the factory, this appliance will have been tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel with the utmost care and attention.
Need help?
Do you have a question about the EGZ700FGS and is the answer not in the manual?
Questions and answers