Advanced Functions; Assigning The Aux1 And Aux2 Keys; Volume Punch-Through - One for All OARN08G User Manual

8-device universal remote control with learning
Table of Contents

Advertisement

Available languages

Available languages

Advanced Functions

Assigning the AUX1 and AUX2 Keys

To program the AUX1 or AUX2 keys, you must first assign them
to a device type.
1.
Press and hold the AUX1 or AUX2 key. The POWER key turns
on.
2.
While holding down the AUX1 or AUX2 key, press and release
the number key on the keypad for the device you want to
control (see the chart below). The POWER key turns off.
AUX1 OR AUX2 KEY CONTROLS:
Additional TV
VCR or DVR
Additional DVD
Additional audio device
Additional satellite receiver, cable box, or DTV
converter
3.
Release the AUX1 or AUX2 key. The POWER key blinks four
times and then turns off. The AUX1 or AUX2 key is now set to
control the device type you selected.
4.
Follow the directions in the auto, brand, direct entry, or
manual code search to program the AUX1 or AUX2 key.

Volume Punch-Through

Volume Punch-Through allows the VOL and MUTE keys, when
through" to either TV or AUDIO, whichever was accessed last.
Volume Punch-Through occurs automatically and allows you to
control the volume without exiting the current mode. (If the
AUX1 or AUX2 key has been programmed with a TV or AUDIO
code, volume can punch through to these devices as well.)
Note:
some satellite receivers.
Advanced Punch-Through
Volume punch-through as described above occurs automatically.
Advanced punch-through lets you specify one device for all
DVD, DVR, or VCR). You can specify either the TV or AUDIO
device (or an AUX key operating a TV or Audio device).
1.
Press and hold the key whose volume commands you want
to send to the TV or audio device. The POWER key turns on.
2.
While holding down the device key, press and hold the VOL
up key. The POWER key turns off.
3.
After holding down both keys for 3 seconds, the POWER
key turns on and stays on. Release both keys.
4.
Press and release the device key you want the Volume
Punch-Through to be directed to from the selected mode
(TV, AUDIO or AUX key). The POWER key flashes.
Note:
Important:
10
press 1
press 2
press 3
press 4
press 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents