Noise Suppression Kit - Option Mgpd1A; External Speaker Kit - Option Mgzm9F - Ericsson EDACS Monogram Series Installation Manual

NOISE SUPPRESSION KIT - OPTION MGPD1A

Refer to the noise suppression kit option installation manual that is
included with this option.

EXTERNAL SPEAKER KIT - OPTION MGZM9F

The external speaker kit includes a speaker (option MGLS1F) and an
external speaker adapter cable (option MGCE3F).
1. Select a speaker location that directs the speaker toward the operator but
does not cause interference with his vision. It also should not present a
hazard in the event of an accident The speaker may be mounted on the
lower edge of the instrument panel, the fire wall, or above the windshield
in some trucks. Use the mounting bracket as a template for locating the
mounting holes, and mount the speaker as shown in Figure 4.
2. Connect the plug end of the external speaker cable to the speaker.
3. Plug the other end of the speaker cable into the external speaker jack on
the rear of the radio.
10
Figure 4 - Mounting The Speaker