Download Print this page

B&B Electronics iMcV-DS3 Operation Manual

Hide thumbs Also See for iMcV-DS3:

Advertisement

Quick Links

FCC Radio Frequency Interference Statement
iMcV-DS3/E3/STS
This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which the user will be required to correct the interference at his own expense.
Repeater
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does not exceed the Class A
limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of
Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de classe A
Operation Manual
prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada.
Limited Lifetime Warranty
Effective for products of B&B Electronics shipped on or after May 1, 2013, B&B Electronics warrants that each such
product shall be free from defects in material and workmanship for its lifetime. This limited lifetime warranty is applicable
solely to the original user and is not transferable.
This warranty is expressly conditioned upon proper storage, installation, connection, operation and maintenance of
products in accordance with their written specifications.
Pursuant to the warranty, within the warranty period, B&B Electronics, at its option will:
1. Replace the product with a functional equivalent;
2. Repair the product; or
3. Provide a partial refund of purchase price based on a depreciated value.
Products of other manufacturers sold by B&B Electronics are not subject to any warranty or indemnity offered by B&B
Electronics, but may be subject to the warranties of the other manufacturers.
Notwithstanding the foregoing, under no circumstances shall B&B Electronics have any warranty obligations or any other
liability for: (i) any defects resulting from wear and tear, accident, improper use by the buyer or use by any third party
except in accordance with the written instructions or advice of the B&B Electronics or the manufacturer of the products,
including without limitation surge and overvoltage conditions that exceed specified ratings, (ii) any products which have
been adjusted, modified or repaired by any party other than B&B Electronics or (iii) any descriptions, illustrations, figures
as to performance, drawings and particulars of weights and dimensions contained in the B&B Electronics' catalogs, price
lists, marketing materials or elsewhere since they are merely intended to represent a general idea of the products and do
not form part of this price quote and do not constitute a warranty of any kind, whether express or implied, as to any of the
B&B Electronics' products.
THE REPAIR OR REPLACEMENT OF THE DEFECTIVE ITEMS IN ACCORDANCE WITH THE EXPRESS WARRANTY SET
FORTH ABOVE IS B&B ELECTRONIC' SOLE OBLIGATION UNDER THIS WARRANTY. THE WARRANTY CONTAINED
IN THIS SECTION SHALL EXTEND TO THE ORIGINAL USER ONLY, IS IN LIEU OF ANY AND ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES AND INDEMNITIES ARE EXPRESSLY DISCLAIMED,
INCLUDING WITHOUT LIMITATION (I) THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
OF MERCHANTABILITY AND (II) ANY WARRANTY THAT THE PRODUCTS ARE DO NOT INFRINGE OR VIOLATE THE
INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL B&B ELECTRONICS BE LIABLE FOR
LOSS OF BUSINESS, LOSS OF USE OR OF DATA INTERRUPTION OF BUSINESS, LOST PROFITS OR GOODWILL OR
OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES. B&B ELECTRONIC SHALL
DISREGARD AND NOT BE BOUND BY ANY REPRESENTATIONS, WARRANTIES OR INDEMNITIES MADE BY ANY
OTHER PERSON, INCLUDING WITHOUT LIMITATION EMPLOYEES, DISTRIBUTORS, RESELLERS OR DEALERS OF
B&B ELECTRONIC WHICH ARE INCONSISTENT WITH THE WARRANTY, SET FORTH ABOVE.
ii

Advertisement

loading

Summary of Contents for B&B Electronics iMcV-DS3

  • Page 1 FCC Radio Frequency Interference Statement iMcV-DS3/E3/STS This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 2: Table Of Contents

    45 Mbps (DS3), 34 Mbps Limited Lifetime Warranty .................. ii (E3) or 52 Mbps (STS). Each iMcV-DS3/E3/STS, BNC/FX module includes one pair of About the iMcV-DS3/E3/STS ................1  ...
  • Page 3: Dip Switches

    In a managed chassis, the software settings take priority over the SNMP enabled feature DIP Switch settings. Make sure that the software settings The iMcV-DS3/E3/STS DIP Switches are located on S1 and S2 on the PCB. The S2 match the desired configuration requirements for the installation.
  • Page 4 This feature can be controlled by SNMP management software (iView ) when the Enabling FiberAlert on both of the iMcV-DS3/E3/STS modules will cause them both to stop iMcV-DS3/E3/STS module is installed in a managed chassis. transmitting unrecoverably when a fault occurs. This feature is designed to only be...
  • Page 5 This feature can only be selected by setting the DIP Switches manually. iMcV-DS3/E3/STS module is installed in a managed chassis. Transmit Data Source These switches select the transmit mode used by the iMcV-DS3/E3/STS module. The transmit modes that can be selected include the following: • Standard data •...
  • Page 6 Remote loopback tests isolate problems feature is designed to work only as the remote module of the Local/Remote pair in on the coax run between an iMcV-DS3/E3/STS module and the connected device, the required Master/Slave configuration. With Remote Unit enabled, the user can while local loopback tests can isolate problems on the fiber connected to the module.
  • Page 7: Led Operation

    Pseudorandom Bit Sequence.” Configure the local device for loopback, conduct the LED Operation test, then check the PBEO LED to verify errors were not received (Refer to the LED The iMcV-DS3/E3/STS module features several diagnostic LEDs per port. The LED section for more information). functions are as follows:...
  • Page 8: Troubleshooting

    3. Verify that you have a valid connection for both the BNC and fiber ports on your media converter. • If there is trouble with link connectivity, make sure the connection is made using 75W Coax cable. NOTE iMcV-DS3/E3/STS Repeater modules cannot be connected iMcV-DS3/E3/STS LineTerm modules successfully.
  • Page 9: B&B Electronics Technical Support

    B&B Electronics Technical Support Fiber Optic Cleaning Guidelines Tel: (800) 346-3119 (in the U.S. and Canada) Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, which can obstruct the optic path and cause performance Monday-Friday, 7:00am-7”00pm CST degradation.
  • Page 10: Electrostatic Discharge Precautions

    Electrostatic Discharge Precautions Safety Certifications Electrostatic discharge (ESD) can cause damage to any product, add-in modules or UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical stand alone units, containing electronic components. Always observe the following Business Equipment. precautions when installing or handling these kinds of products Do not remove unit from its protective packaging until ready to install.
  • Page 11 The information in this document is subject to change without notice. B&B Electronics assumes no responsibility for any errors that may appear in this document. iMcV-DS3/E3/STS Repeater is a trademark of B&B Electronics. Other brands or product names may be trademarks and are the property of their respective companies.

This manual is also suitable for:

Imcv-e3Imcv-stsImcv-ds3/e3/sts