Power On And Entering Into The On Mode - Bolymedia SG370-6mHD User Manual

Pocket Camera SG370-6mHD/SG570-10mHD

3.3 Power on and Entering into the ON Mode

Before switching on, please pay attention to
the follows:
1. Avoid
disturbances in front of the camera such as big
leaf, curtain, air-conditioner, air outlet of the
chimney and other heat sources to prevent from
false triggering.
2. The height from ground for placing the
camera should vary with the object size
appropriately. In general, one to two meters are
preferred.
Slide the power switch to the ON position
to power on the camera and enter into the ON
.
mode
After switching on the camera, the motion
indication LED (red) will blink for about 10s.
The 10s is a buffering time before autonomic
capturing photos or videos, e.g. for closing and
locking the bottom cover, fixing the camera on a
tree and walking away.
In TEST mode, it requires to connect the
control then to do further customizing settings,
when the user complete the settings, it requires
to unplug the control to enter into normal use,
that is, if the wired control still be connected
3 Easy Operations
temperature
7
Page
and motion