Related Manuals for VTech DT39
Summary of Contents for VTech DT39
- Page 1 DT39 USER MANUAL(EN) 2-Wire Video Intercom System Read this manual carefully before using the product, and keep it well for future use.
-
Page 2: Parts And Function
Introduction The monitor is designed with 3.9 inch screen, it provides a resolution of 800x480 pixels with high quality image display. The touch sensitive button makes the operation more easily. Parts and Function Microphone LCD Screen Mounting Hook Touch Button Connection Port Message Indicator Power Indicator... -
Page 3: Unit Mounting
Unit Mounting Accessory contents: Accessories include a Bracket, two 4X25 screws (use to fasten the Mounting Bracket), 2 wire connectors (use to connect with Monitor). Installation steps: Installation height for indoor monitor usually is 145~160cm(refer to sketch map). Wire the cable correctly(see the later connection chapter) then hang the Monitor on the Mounting Bracket firmly. - Page 4 · Press TALK/MON Button on moni- DS-1 00:30 tor, you can communicate with the visitor for 90 seconds.After finishing communication,press TALK/MON but- ton again to end the communication. · During talking state, Press UNLOCK Button to open the corresponding door for the visitor.
- Page 5 : A Monitor can be assigned as Guard Unit Monitor; when the Call Guard unit Guard Unit Monitor answers the call, conversation with the guard person is started. Other Function: 1.Call Transfer function:Touch Call Transfer item on main menu page to enter call transfer page,and then you can select the item you want.
-
Page 6: Monitor Time Setting
Monitor Time Setting Select and touch Setup on main menu page, then select Monitor Time... item. Use button to Adjust Value increase / decrease the value, press Current: 30sec Exit button to save and return last page. Menu Language Setting Maximum 16 languages can be sup- Language H/W:... -
Page 7: Restore To Default
· Note that all the modifications will be done immediately after the operation. Press button to quit the adjust page. Restore to Default On main menu page, select About->Restore. If touch icon ,All set- tings will be restored to default, if you don't want to restore, touch icon to cancel the operation.(Note that the restore to default operation will not change the time setting and the datas.) - Page 8 The setting items are as followings: [8000]:Master 0 [8001]~[8003]:Slaver 1~3 [8004]:Guard unit [8005]:Not guard unit [8006]:Panel on as slaver called [8007]:Panel off as slaver called [8014]:Unlock menu on [8015]:Unlock menu off [9006]:Simplified version [9007]:Full-featured version How to set the monitor as a Guard Monitor A Monitor can be assigned as Guard Unit Monitor;...
-
Page 9: Specification
How to set 2 locks control The monitor can be set to control 2 locks while you should set the unlock menu item to “on “ state. The code number of 8015 is used to set the unlock menu off (by default) that it can only control one lock. - Page 10 Precautions 1) All components should be protected from violence vibration. And not allow to be impacted, knocked and dropped. 2) Please do the cleanness with soft cotton cloth, please do not use the or- ganic impregnant or chemical clean agent. If necessary, please use a little pure water or dilute soap water to clean the dust.
- Page 11 Note -11-...
-
Page 12: Warranty Card
4. Attempting to force the device to perform functions for which it is not intended 5. Attaching the device to power supplies other than thoserecommended by the manufacturer Distributor for Warranty purposes: Intelligent Home Online Ltd 62 Hartley Old Road Purley, Surrey CR8 4HJ +44 (0)20 86170015 www.intelligenthomeonline.com... - Page 13 The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved. DT-ENG-39-V1 20140115...
Need help?
Do you have a question about the DT39 and is the answer not in the manual?
Questions and answers