Delete The Preset Stations; Set The Mw Step - Sunstech RP-DS30 Operation Manual

RADIO OPERATION

DELETE THE PRESET STATIONS

Delete One Preset Stations
1. Select the band.
2. Press < > or < > shortly to select the address where
the frequency was saved in.
press shortly
3. Short press < > with "d" displays and the memory
address flashes.
4. While "d" flashing, press <
you don't want to delete, press any key to exit.
press shortly
Delete all the Preset Stations
1. Select the band.
2. Long press < > with "d" flashing.
3. Press < > shortly to delete all the preset frequencies
in the selected band. If you don't want to delete, press
any key to exit.
GB-12
89.8
FM
99 05
select the address
> shortly once to delete. If
89.8
FM
99
"address" flashes
SET THE MW (AM) STEP (9K / 10K)
When in power off mode, long press <
seconds, "A09" or "A10" will display. Repeat again to change
the AM tuning step.
A09
25
NOTE:
The AM tuning step will resume to the inital factory default after you remove all
the batteries.
SET THE MW (AM) STEP
> for about 5
25
GB-13