Clock And Alarm Setting; Time Setting; Set The Alarm Time - Sunstech RP-DS30 Operation Manual

Fm stereo mw sw lw digital receiver
Table of Contents

Advertisement

Available languages

Available languages

CLOCK AND ALARM SETTING

TIME SETTING

1. With the radio off, short press <
press <
> or <
> shortly to adjust the hour.
2. After adjusting the hour, press <
with the minute flashes, press <
to adjust the minute.
press shortly
Hour : Minute
0 05
25
Second
NOTE:
The clock will resume to the initial factory default after you remove all the batteries.
CLOCK MODE (12H / 24H) SETTING
When in power off mode, long press <
seconds, "12H" or "24H" will display. If you want to change
the clock mode, please long press <
GB-14
> with hour flashes,
> shortly once again,
> or <
> shortly
8 25
25
> for about 5
> once again.
CLOCK AND ALARM SETTING
H24
25
NOTE:
The clock mode will resume to the initial factory default after you remove all the
batteries.

SET THE ALARM TIME

1. Turn off the radio, press <
flashes, then press <
> or <
Press
shortly
2. After adjusting the hour, press <
minute and "
" flashes, then press <
adjust the minute.
NOTE: The unit will alarm by your preset station & volume.
TURN ON/OFF THE ALARM FUNCTION
Turn off the radio, press <
activate the alarm. Shortly press <
disappears to deactivate.
0 05
25
The alarm function is activated.
25
> shortly with hour and "
> to adjust the hour.
0 05
25
"Hour" and "
" flashes
> shortly once again with
> or <
> to
> shortly with "
" displays to
> again with "
"
0 05
25
The alarm function is deactivated.
GB-15
"

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RP-DS30 and is the answer not in the manual?

Table of Contents