Display Settings - JVC KD-AR765S Instruction Manual

AUDIO SETTINGS
(For KD-R760
I
KD-R660)
- - - - - - - - - . - - - - - · - - - - - - · - - - - - - - - - - - - - -
. Lineout terminal
Setting . · · ·FRONT
I
REARI SW- - ----:-·
-REruvR-EAR·--~-- F;;;;;;~~~;--------1··-~~~~ili~~~~~t ~-=~~-
REAR!sus.w Front speakers output
I
Subwoofer output
~tJB.W/SuiYJ--
Front speakers output
I
Subwoofer
out~~-;-----·--·-
(For KD-AR565 I KD-R460)
-------,....-
T
Lineout terminal
Settin~ . r------~- R- EA - R- IS - W ----------:--
REAR/REAR
-~
Rear speakers output
REAR!SUB.W
Subwoofer output
SUB.WISUB.W
Subwoofer output
'
------~---·--·--·--·--·
• . Connection via speaker
leads(~
23)
Setting
l .
Rear speaker lead
r---------: - .---------. . ·---,--,.-· - - -----------· - -
' l (left)
R (right)
REAR/REAR Rear speakers output . Rear speakers output
-~---·-·-
---·-· - - - - - - - - ----
RE~R/SU8.
W Rear speakers output Rear speakers output
SUB.WISUB.W Subwooferoutput (Mute)
If [SUB.WISUB.W] is
sP.Iected:
-[HIGH 120HZ] is selected in [SUB.W LPF] and [THROUGH] is not available.
- [R01] Is selected in [FADER] and selectable range is [R06] to [00]
•
DISPLAY SETTINGS ·
KO-AR765S
I
KO-R760
ALL ZONE
KO-R660 I KO-R460
1<D-AR565
1 P.ress and hold DISP-SETUP.
2 Turn the vol.ume knob to make a selection {see the following table),
then press the knob. .
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press DISP-~.;TUP to exit .
To return to the preVious setting item, press
0./~.
DISPLAY
DIMMER
I
·I
i
l_
Default: XX
Selects the display a~d button illumination adjusted in the [BRIGHTNESS]
setting.
OFF: Selects the day adjustments:; ON: Selects the night adjustments. ;
DIMMER TIME: AdjustS the dimmer on and off time.
Turn the volume knob to adjust the [ON] time, then press the knob.
Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: · 18:00 or 6:00PM ·
[OFF]: 6:00 or 6:00AM)
AUTO:
Change~between
the day and night adjustments when you turn off or
on the car headlights.
* 1
For KD-AR765S'I KD-R760
I
KD-AR565, the display and button colors
change according to the settings made on [COLOR].
*1
The illumination control wire connection is required.
<•
23)