Frigidaire Washer Use & Care Manual page 55

Attach front mounting brackets
1. Attach each front clip to outer-most
set of holes with 2 screws.
Attach rear mounting brackets
• Each rear bracket has tabs marked "A" and "B".
TAB B
• Each pedestal has slots in the rear marked "1", "2"
and "3".
SLOT 1
SLOT 2
SLOT 3
• Each rear bracket also has 2 arrows indicating
bracket direction when mounted on the pedestal.
DIRECTION
INDICATOR
ARROWS
Front brackets from
GREEN kit.
1. Determine your appliance type (washer or dryer) and style of side panel ac-
cording to columns 1 and 2 in table below.
2. Orient rear brackets according to column 3 for your particular model.
3. Attach each bracket with 2 screws through the holes that line up on pedestal.
1 - Appliance
TAB A
DRYER
DRYER
WASHER
WASHER
3
DRAWER
2 - Side panel style of your appliance
3 indents on side.
2 indents on
side and 4 inch
knockout for side
venting.
3 indents on side.
3 indents on side
in shape of "lOl".
3 - Rear bracket orientation
• Rear brackets from
GREEN kit
• Tab A into
• Slot 1
• Arrow pointing to
back
• Rear brackets from
GREEN kit
• Tab B into
• Slot 3
• Arrow pointing to
front
• Rear brackets from
GREEN kit
• Tab A into
• Slot 2
• Arrow pointing to
back
• Rear brackets from
GREEN kit
• Tab A into
• Slot 1
• Arrow pointing to
front