INTRODUCTION Congratulations on your purchase of the SM DJ Mixer series – SM-135. In order to get the best performance of the SM DJ Mixer series, please read all safety and owner’s manual carefully before operating the mixer, and keep it in a safe place for further reference.
Page 4
Rear View Top View Front View - - SM-135.indd 2010-3-31 10:49:02...
Page 5
When you set the cue Switch to PGM position , you can cue the output signal of the mixer; When you set the cue Switch to CUE position , you can cue the output signal of the select the channel. 16) Cue Level Control With this knob, you can adjust the headphones volume without changing the output signal - - SM-135.indd 2010-3-31 10:49:05...
First, remove the fader knob, and then remove the two outer screws on the fader panel. Take the fader out, unplug the connection cable, and connect the new fader by fixing it in the device. - - SM-135.indd 2010-3-31 10:49:05...
S/N Ratio -80dB Talkover Attenuation -14dB Tone Control High 10KHz, -30dB~15dB Middle 1.2KHz, -30dB~15dB Bass 50Hz, -30dB~15dB Dimension (W x D x H) 254x356x102(mm) Weight (kg) Power Supply 115/230 V, 50/60Hz Power consumption 7.5 W - - SM-135.indd 2010-3-31 10:49:05...
Need help?
Do you have a question about the SM-135 and is the answer not in the manual?
Questions and answers