Download Print this page


User's Manual
Satellite L650/L655/L650D/L655D /
Satellite Pro L650/L650D Series
Downloaded from Manuals



   Also See for Toshiba Satellite L650

   Related Manuals for Toshiba Satellite L650

   Summary of Contents for Toshiba Satellite L650

  • Page 1

    User’s Manual Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Downloaded from Manuals...

  • Page 2: Table Of Contents

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Table of Contents Getting Started Chapter 1 Equipment checklist........1-1 Getting Started .

  • Page 3

    TOSHIBA support ........

  • Page 4: Specifications

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Specifications Appendix A Display Controller and Video mode Appendix B Wireless LAN Appendix C Bluetooth wireless technology Interoperability Appendix D AC Power Cord and Connectors Appendix E TOSHIBA PC Health Monitor Appendix F...

  • Page 5

    Devices, Inc. Windows, Microsoft and Windows logo are registered trademarks of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

  • Page 6

    This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on TOSHIBA’s web site on the Internet.

  • Page 7: Working Environment

    This product was designed to fulfil the EMC (Electromagnetic Compatibility) requirements to be observed for so-called "Residential, commercial and light industry environments". TOSHIBA do not approve the use of this product in working environments other than the above mentioned "Residential, commercial and light industry environments".

  • Page 8

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Following information is only valid for EU-member States: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres.

  • Page 9: Following Information Is Only For Turkey

    The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.

  • Page 10

    ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency.

  • Page 11: Optical Disc Drive Safety Instructions

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Optical disc drive safety instructions Be sure to check the precautions at the end of this section. ■ The DVD Super Multi/BD-Combo/BD-Writer drive model employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference.

  • Page 12

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Panasonic System Networks DVD Super Multi UJ890 BD-Combo UJ141 BD-Writer UJ240 Panasonic System Networks Co., Ltd. HITACHI-LG Data Storage, Inc. DVD Super Multi GT30N/GT30F Hitachi-LG Data Storage, Inc. 22-23,KAIGAN 3-CHOME, MINATO-KU,TOKYO,108-0022 JAPAN Downloaded from Manuals User’s Manual...

  • Page 13

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series TOSHIBA SAMSUNG STORAGE TECHNOLOGY DVD Super Multi TS-L633C/TS-L633Y TOSHIBA SAMSUNG STORAGE TECHNOLOGY KOREA CORPORATION 416, MEATAN-3 DONG, YEONGTONG-GU, SUWON CITY, GYEONGGI, 443-742, KOREA Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT."...

  • Page 14: Chapter 1 Getting Started

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Preface Congratulations on your purchase of the Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series computer. This powerful notebook computer provides excellent expansion capability, includes multimedia functionality, and is designed to provide years of reliable, high-performance computing.

  • Page 15

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Icons Icons identify ports, dials, and other parts of your computer. The indicator panel also uses icons to identify the components it is providing information Keys The keyboard keys are used in the text to describe many computer operations.

  • Page 16

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Terminology This term is defined in this document as follows: Start The word "Start" refers to the " " button in Windows 7. HDD or Hard disk Some models are equipped with a "Solid State drive Drive (SSD)"...

  • Page 17: General Precautions

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.

  • Page 18

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series To keep your computer in prime operating condition, protect your work area from: ■ Dust, moisture, and direct sunlight. ■ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones.

  • Page 19: Instruction Manual For Safety And Comfort

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Mobile phones Please be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use.

  • Page 20: Equipment Checklist

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.

  • Page 21

    ■ Windows 7 ■ TOSHIBA Value Added Package ■ TOSHIBA Recovery Media Creator ■ WinDVD BD for TOSHIBA (Is preinstalled with some models) ■ Corel DVD MovieFactory for TOSHIBA (Is preinstalled with some models) ■ TOSHIBA Assist ■ TOSHIBA ConfigFree™...

  • Page 22: Connecting The Ac Adaptor

    Getting Started ■ Use a virus-check program and make sure it is updated regularly. ■ Never format storage media without checking its content - formatting destroys all stored data. ■ It is a good idea to periodically back up the internal hard disk drive or other main storage device to external media.

  • Page 23

    ■ Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 24

    Getting Started Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model. 2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the right side of the computer.

  • Page 25: Opening The Display

    Getting Started Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.

  • Page 26: Turning On The Power

    Getting Started Turning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-Up Modes for more information.

  • Page 27: Turning Off The Power

    Getting Started Turning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on.

  • Page 28

    Getting Started ■ Before entering Sleep Mode, be sure to save your data. ■ Do not install or remove a memory module while the computer is in Sleep Mode. The computer or the memory module could be damaged. ■ Do not remove the battery pack while the computer is in Sleep Mode (unless the computer is connected to an AC power source).

  • Page 29: Hibernation Mode

    Getting Started When you turn the power back on, you can continue where you left when you shut down the computer. ■ When the computer is in Sleep Mode, the power indicator will blink amber. ■ If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode - Sleep Mode will consume more power while the computer is off.

  • Page 30: Restarting The Computer

    Getting Started Starting Hibernation Mode You can also enable Hibernation Mode by pressing FN + F4 - please refer to Chapter 5, Keyboard, for further details. To enter Hibernation Mode, follow the steps below. 1. Click Start. 2. Point to the arrow icon ( ) and then select Hibernate from the menu.

  • Page 31: System Recovery Options And Restoring The Preinstalled Software

    ■ Restoring the pre-installed software from the Recovery hard disk drive ■ Ordering Recovery Discs from TOSHIBA and restoring the pre-installed software from them* * Please note that this service is not free-of-charge. Downloaded from Manuals User’s Manual...

  • Page 32

    5. Select the TOSHIBA Recovery Media Creator icon from the Windows 7 Start menu. 6. After TOSHIBA Recovery Media Creator starts, select the type of media and the title you wish to copy, and then click the Create button. Downloaded from Manuals User’s Manual...

  • Page 33

    2. While holding down F12 key on the keyboard, turn on your computer - when TOSHIBA Leading Innovation>>> appears, release the F12 key. 3. Use the up and down cursor keys to select the CD-ROM icon from the menu.

  • Page 34

    Please set your BIOS to default before you recover your computer to the factory state! Ordering Recovery Discs from TOSHIBA* You can order Product Recovery discs for your notebook from the TOSHIBA Europe Backup Media Online Shop. * Please note that this service is not free-of-charge. 1. Visit on the Internet.

  • Page 35: Chapter 2 The Grand Tour

    The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section.

  • Page 36: Left Side

    The Grand Tour Left side The following figure shows the computer’s left side. 1. Security lock slot 6. LAN jack 2. Modem jack* 7. eSATA/USB combo port 3. Cooling vents 8. Microphone jack 4. External monitor port 9. Headphone jack 5.

  • Page 37

    The Grand Tour External monitor port This port provides 15-pin, analog VGA port. This port allows you to connect an external monitor to the computer. HDMI out port HDMI out port can connect with Type A connector HDMI cable. HDMI cable can send video and audio signals. In addition to this, it can send and receive control signals.

  • Page 38: Right Side

    The Grand Tour Right side The following figure shows the computer’s right side. 1. Bridge media slot 3. Optical disc drive 2. Universal Serial Bus (USB 2.0) ports 4. DC IN 19V jack The right side of the computer * Provided with some models. Bridge media slot This slot lets you insert an SD™/SDHC™/SDXC™...

  • Page 39: Back

    The Grand Tour DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries. Please note that you should only use the model of AC adaptor supplied with the computer at the time of purchase - using the wrong AC adaptor can cause damage to the computer.

  • Page 40: Underside

    The Grand Tour Underside The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage. 1. Battery lock 3. Memory module slot 2. Battery release latch The underside of the computer Battery lock Slide the battery lock to release the battery pack...

  • Page 41: Front With The Display Open

    The Grand Tour Front with the display open This section shows the computer with the display panel open. In order to open the display, lift the display panel up and position it at a comfortable viewing angle for you. 1. Wireless LAN and Wireless WAN antennas (not shown)* 7. Display hinges 2.

  • Page 42

    You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.

  • Page 43: Indicators

    The Grand Tour Touch Pad The Touch Pad located in the palm rest is used to control the movement of the on-screen pointer. For more information, please refer to the Using the Touch Pad section in Chapter 4, Operating Basics. Touch Pad control The control buttons located below the Touch Pad buttons...

  • Page 44: Keyboard Indicators

    The Grand Tour Bridge media slot The Bridge media slot indicator glows white when the computer is accessing the Bridge media slot. Wireless The Wireless communication indicator blinks communication amber when the Bluetooth, Wireless LAN and Wireless WAN functions are turned on. Only some models are equipped with Bluetooth, Wireless LAN and Wireless WAN functions.

  • Page 45: Optical Disc Drives

    The Grand Tour Optical disc drives The computer may be installed with a DVD Super Multi, BD-Combo or BD- Writer drive. A Serial ATA interface controller is used for optical disc operation. When the computer is accessing a optical disc, an indicator on the drive glows.

  • Page 46: Writable Discs

    This section describes the types of writable CD/DVD/BD discs. Check the specifications of your drive to see the types of discs it can write. Use TOSHIBA Disc Creator and Corel DVD MovieFactory to write compact discs. Refer to Chapter 4, Operating Basics.

  • Page 47

    The Grand Tour CD read 24 speed (maximum) CD-R write 24 speed (maximum) CD-RW write 16 speed (maximum, Ultra-speed media) BD-Writer drive The full-size BD-Writer drive module lets you record data to rewritable CD/DVD/BDs as well as run either 12 cm (4.72") or 8cm (3.15") CD/DVD/BDs without using an adaptor.

  • Page 48: Ac Adaptor

    The Grand Tour DVD Super Multi drive The full-size DVD Super Multi drive module lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the centre of a disc and faster at the outer edge.

  • Page 49

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 50: Chapter 3 Hardware, Utilities And Options

    Processor Processor type varies depending on the model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start All Programs TOSHIBA Utilities PC Diagnostic Tool.

  • Page 51

    Hardware, Utilities and Options Video RAM The memory in a computer's graphics adaptor, used to store the image displayed on a bitmap display. The amount of Video RAM available is dependent on the computer's system memory. Start Control Panel Appearance and Personalization Display Adjust resolution.

  • Page 52: Optical Disc Drive

    Hardware, Utilities and Options AC adaptor The AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord which will either have a 2-pin or 3-pin plug enclosure. As the AC adaptor is universal, it can receive a range of AC voltages from 100 to 240 volts, however you should note that the output current varies among different models.

  • Page 53

    Hardware, Utilities and Options Display The computer's internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability. Display panel 39.6cm (15.6") TFT LCD screen, 16 million colors, with the following resolution: ■...

  • Page 54

    You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.

  • Page 55: Special Features

    For more information regarding Wireless LAN, please refer to the Legal Footnotes section. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.

  • Page 56

    Hardware, Utilities and Options HDD automatic power This feature automatically cuts off power to the hard disk drive when it is not accessed for a specified time, with power being restored when the hard disk drive is next accessed. This can be specified in the Power Options.

  • Page 57

    USB port, clicking the mouse button or pressing the keyboard will wakeup the computer. TOSHIBA PC Health The TOSHIBA PC Health Monitor application Monitor proactively monitors a number of system functions such as power consumption, battery health and system cooling, informing you of significant system conditions.

  • Page 58: Utilities And Applications

    TOSHIBA Flash Cards The TOSHIBA Flash Cards provide a quick way to modify selected system functions and to launch applications.

  • Page 59

    TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communication devices and network connections, help in the...

  • Page 60

    TOSHIBA Service This application allows your computer to Station automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited...

  • Page 61: Optional Devices

    TOSHIBA Media Controller TOSHIBA Media Controller. For more information, please refer to the TOSHIBA Media Controller Help. Optional devices Optional devices can expand the computer's capabilities and its versatility. This section describes the connection or installation of the following devices: Cards/memory ■...

  • Page 62: Memory Media

    Hardware, Utilities and Options ■ Keep foreign objects out of the Bridge media slot. Never allow metal objects, such as screws, staples and paper clips, to enter the computer or Keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.

  • Page 63: Card Care

    Hardware, Utilities and Options ■ SD, SDHC and SDXC memory cards appear the same externally. However, the logo on SD, SDHC and SDXC memory cards is different, so pay careful attention to the logo when purchasing. ■ The SD memory card logo is ( ■...

  • Page 64: Memory Card Care

    Hardware, Utilities and Options ■ The card is designed so that it can be inserted only one way. Do not try to force the card into the slot. ■ Do not leave a card partially inserted in the slot. Press the card until you hear it click into place.

  • Page 65: Removing A Memory Media

    Hardware, Utilities and Options 1. Bridge media slot 2. Memory media Inserting a memory media ■ Make sure memory media is oriented properly before you insert it. If you insert the media in wrong direction, you may not be able to remove ■...

  • Page 66: Additional Memory Module

    Hardware, Utilities and Options 1. Bridge media slot 2. Memory media Removing memory media ■ Make sure the Bridge Media slot indicator is out before you remove the memory media or turn off the computer’s power. If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media.

  • Page 67: Installing A Memory Module

    Hardware, Utilities and Options ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. a. The computer is turned on. b. The computer was shut down in either Sleep or Hibernation Mode.

  • Page 68

    Hardware, Utilities and Options 6. Slide your fingernail or a thin object under the cover and lift it off. 1. Memory module cover 2. Screw Removing the memory module cover 7. Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 45 degree angle before holding it down until the latches on either side snap into place.

  • Page 69: Removing A Memory Module

    Hardware, Utilities and Options ■ Align the grooves along the edges of the memory module with the locking tabs on the connector and insert the module into the connector firmly - if you find it difficult to install the memory module, gently prise the locking tabs outwards using the tip of your finger.

  • Page 70

    Hardware, Utilities and Options 7. Push the latches away from the module in order to release it - a spring will force one end of the module up at an angle. 8. Grasp the module by its edges and remove it from the computer. ■...

  • Page 71: External Monitor

    Hardware, Utilities and Options External monitor An external analog monitor can be connected to the external monitor port on the computer. To connect a monitor, follow the steps as detailed below: Connecting the monitor cable 1. Turn the computer's power off. 2.

  • Page 72: Disconnecting An Esata Device

    Hardware, Utilities and Options eSATA (External Serial ATA) An device corresponding to eSATA function can be connected to the eSATA/USB combo port on the computer. Connecting the eSATA device To connect an eSATA device, follow the steps as detailed below: 1.

  • Page 73: Connecting The Hdmi Out Port

    Hardware, Utilities and Options 2. Click the Safely Remove Hardware and Eject Media icon on the Windows Taskbar. 3. Click an eSATA device that you want to remove. 4. Carefully pull an eSATA device's eSATA/USB combo connector out from within the computer's eSATA/USB combo port. HDMI A HDMI monitor can be connected to the HDMI out port on the computer.

  • Page 74: Settings For Display Video On Hdmi

    Hardware, Utilities and Options ■ When you connect a television or external monitor to the HDMI port and the display output device is set to HDMI. When you unplug the HDMI cable and re-plug it in please wait at least 5 seconds before you replug the HDMI cable again.

  • Page 75: Security Lock

    Hardware, Utilities and Options Security lock A security locks enable you to anchor your computer a desk or other heavy object in order to help prevent unauthorized removal or theft. The computer has a security lock slot on its left side into which you can attach one end of the security cable, while the other end attaches to a desk or similar object.

  • Page 76: Optional Accessories

    For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer: DDR3-1066/1333/1600 A 1 GB, 2 GB or 4 GB memory module (DDR3-...

  • Page 77: Chapter 4 Operating Basics

    Operating Basics Chapter 4 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

  • Page 78: Touch Pad Gesture

    Operating Basics You can also tap the Touch Pad to perform functions similar to those of the left button on a standard mouse. Click: Tap once Double-click: Tap twice Drag and drop: Tap to select the item(s) you want to move, leave your finger on the Touch Pad after the second tap and then move the item(s) to their new destination.

  • Page 79: Web Camera

    You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.

  • Page 80: Using The Toshiba Face Recognition

    Using the TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier.

  • Page 81

    Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.

  • Page 82

    Utilities Face Recognition Help. Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition. Two authentication modes are provided. ■ 1:N Mode Login screen: If the face authentication tile is selected by default, you can log in without using the keyboard or mouse.

  • Page 83: Using Optical Disc Drives

    Operating Basics 1:N Mode Login screen 1. Turn on the computer. 2. The Select Tiles screen will be displayed. 3. Select Start face recognition ( 4. "Please face the camera" will be displayed. 5. Verification will be performed. If the authentication is successful, the image data taken in step 4 will be faded in and placed over one another.

  • Page 84: Loading Discs

    Operating Basics Loading discs To load a disc, follow the steps as detailed below: 1. When the computer’s power is on, press the eject button to open the disc tray slightly. 2. Grasp the disc tray gently and pull until it is fully opened. 1.

  • Page 85: Removing Discs

    Operating Basics ■ Do not touch the laser lens or any portion of its surrounding casing as this could cause misalignment. ■ Prevent foreign objects from entering the drive. Check the surface of the disc tray, especially the area behind the front edge of the disc tray, to make sure there are no such objects before closing the drive.

  • Page 86

    Operating Basics Removing a disc 3. Push the center of the disc tray to close it. Press gently until it locks into place. How to remove discs when the disc tray will not open Pressing the eject button will not open the disc tray when the computer power is off.

  • Page 87: Important Message

    CD-R/RW media cannot be accessed using the burn cd/dvd option in Media Center. ■ To write data to CD-R/-RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. When writing information to media using an optical drive, you should always ensure that you connect the AC adaptor to a live power socket.

  • Page 88

    RAM, BD-R, BD-R (Dual Layer), BD-RE or BD-RE (Dual Layer) media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc.

  • Page 89

    RAM media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd.

  • Page 90

    Operating Basics CD-RW: (Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN Co.,Ltd. (for 8x and 16x speed media) MITSUBISHI KAGAKU MEDIA CO.,LTD. (for 8x and 16x speed media) Hitachi Maxell,Ltd. (for 8x and 16x speed media) DVD-R (Dual Layer): MITSUBISHI KAGAKU MEDIA CO., LTD.

  • Page 91

    Operating Basics ■ The actual number of rewrites to CD-RW, DVD-RW, DVD+RW, DVD- RAM or BD-RE media will be affected by the quality of the disc itself and the way in which it is used. ■ There are two types of DVD-R media available, authoring discs and general use discs.

  • Page 92: When Writing Or Rewriting

    CD/DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.

  • Page 93: Toshiba Disc Creator

    TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recorder.

  • Page 94: Data Verification

    3. Select File Open or Full Compare mode. 4. Click the OK button. How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information. When Using Corel DVD MovieFactory for TOSHIBA(optional)

  • Page 95: Important Information For Use

    MovieFactory information. ■ Opening the Corel DVD MovieFactory Manual Start All Programs DVD MovieFactory for TOSHIBA MovieFactory User Manual Important information for use Note the following limitations when you write Video DVD or Blu-ray disc Movie: 1. Editing digital video ■...

  • Page 96: Using Windvd Bd For Toshiba

    Please be aware of the following limitations when you use WinDVD BD for TOSHIBA: Notes on use ■ WinDVD BD for TOSHIBA is for Blu-ray Disc playback only. DVD playback is not supported. Please use "Windows Media Player" for DVD playback. ■...

  • Page 97: Starting Windvd Bd For Toshiba

    Sleep or Hibernation Mode Starting WinDVD BD for TOSHIBA Use the following procedure to start WinDVD BD for TOSHIBA. ■ When a Blu-ray disc is set in the BD drive, WinDVD BD for TOSHIBA starts automatically. ■ Select Start...

  • Page 98: Operating Windvd Bd For Toshiba

    Open WinDVD BD for TOSHIBA HELP WinDVD BD for TOSHIBA features and instructions are also explained in detail in WinDVD BD for TOSHIBA Help. Use the following procedure to open WinDVD BD for TOSHIBA Help. ■...

  • Page 99: Sound System

    Operating Basics Sound System This section describes some of the audio control functions. Adjusting System Volume You can control the overall level of sound using Windows Volume Mixer. To launch Volume Mixer, follow the steps below. 1. Right-click the Speakers icon on the Taskbar. 2.

  • Page 100: Dolby Advanced Audio

    Operating Basics Opening SmartAudio Help Click "?" in the top right corner of the SmartAudio window will open the Help file in your selected language, or in English if your selected language is not supported. Dolby Advanced Audio* *Is preinstalled with some models Dolby Advanced Audio provides a stunning listening experience from any pair of speakers or headphones.

  • Page 101: Wireless Communications

    Operating Basics Notes on Using the Microphone You can use the built-in or an external microphone that connects to the microphone jack to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions (built-in microphone is provided with some models).

  • Page 102: Wireless Lan

    ■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Downloaded from Manuals User’s Manual...

  • Page 103: Bluetooth Wireless Technology

    This Bluetooth Stack is based on the Bluetooth Version 1.1/1.2/2.0+EDR/2.1+EDR specification. However, TOSHIBA cannot confirm the compatibility between any computing products and/or other electronic devices that use Bluetooth, other than TOSHIBA notebook computers. Downloaded from Manuals User’s Manual...

  • Page 104: Product Support

    Operating Basics Release Notes related to the Bluetooth Stack for Windows by TOSHIBA 1. Fax application software: Please be aware that there is some fax application software that you cannot use on this Bluetooth Stack. 2. Multi-user considerations: The use of Bluetooth is not supported in a multi-user environment. This means that, when you use Bluetooth, other users that are logged into the same computer will not be able to use this type of functionality.

  • Page 105: Lan

    Operating Basics The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). This section describes how to connect/disconnect to a LAN. Do not install or remove a memory module while Wake-up on LAN is enabled.

  • Page 106: Connecting The Lan Cable

    Operating Basics Connecting the LAN cable To connect the LAN cable, follow the steps as detailed below: ■ Connect the AC adaptor before connecting the LAN cable. The AC adaptor must remain connected during LAN use. If you disconnect the AC Adaptor while the computer is accessing a LAN, the system may hang up.

  • Page 107: Computer Handling

    Operating Basics Computer Handling This section explains computer handling and maintenance. Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and dirt, and use care with all liquids around it. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely - in these circumstance you should get the computer inspected by an authorized service provider in order to assess the scope of any...

  • Page 108: Heat Dispersal

    Operating Basics Heat dispersal To protect against overheating, the processor is equipped with an internal temperature sensor which activates a cooling fan or lowers the processing speed if the computer's internal temperature rises to a certain level. You are able to select whether to control this temperature by either turning on the fan first, then if necessary lowering the processor speed, or by lowering the processor speed first, then if necessary turning on the fan.

  • Page 109: Chapter 5 The Keyboard

    The Keyboard Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.

  • Page 110: Emulating Keys On An Enhanced Keyboard

    Soft keys: FN key combinations The FN (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 111: Hot Keys

    The Keyboard Hot keys Hot keys (pressing FN + a function or ESC key) let you enable or disable certain features of the computer. Mute: Pressing FN + ESC turns the volume on and off. Lock: Pressing FN + F1 enters ''Lock computer mode''. To restore your desktop, you need to log on again.

  • Page 112

    Touch Pad: Pressing FN + F9 enables or disables the Touch Pad function. Zoom: Pressing FN + Space changes the display resolution. TOSHIBA Zooming Utility (reduce): Pressing FN + 1 reduces the icon size on the desktop or the font sizes within one of the supported application windows.

  • Page 113: Windows Special Keys

    The Keyboard FN Sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an "F Number" key. To start the TOSHIBA Accessibility utility, click Start...

  • Page 114: Chapter 6 Power And Power-up Modes

    Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor, battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes information on charging and changing batteries, tips for saving battery power, and information on the different power-up modes.

  • Page 115: Monitoring Of Power Condition

    Power and Power-Up Modes Power on Power off (no operation) AC adaptor Battery charge • Operates is above low • LED: Battery off connected battery trigger DC IN off point Battery charge • Operates is below low • LED: Battery battery trigger flashes amber point...

  • Page 116: Battery

    Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected - the following indicator conditions should be noted: White Indicates the AC adaptor is connected and is correctly supplying power to the computer. Flashing amber Indicates a problem with the power supply.

  • Page 117

    <F2> to setup You can change the Real Time Clock settings by turning the computer on while pressing the F2 key and then release the F2 key when the TOSHIBA Leading Innovation >>> screen appears. Please refer to Chapter 8 Troubleshooting for further information.

  • Page 118: Charging The Batteries

    ■ The computer's RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed. Dispose of the battery as required by local ordinances or regulations.

  • Page 119: Battery Charging Notice

    Power and Power-Up Modes Time Refer to User Information Guide about Charging time. Battery charging notice The battery may not begin charging immediately under the following conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all).

  • Page 120: Maximizing Battery Operating Time

    Power and Power-Up Modes Maximizing battery operating time A battery's usefulness depends on how long it can supply power on a single charge, while how long the charge lasts in a battery depends on: ■ Processor speed ■ Screen brightness ■...

  • Page 121: Replacing The Battery Pack

    Power and Power-Up Modes 4. Connect the AC adaptor to the DC IN 19V jack of the computer, and to a wall outlet that is supplying power. The DC IN indicator should glow white, and the Battery indicator should glow amber to indicate that the battery pack is being charged, however, in the event that DC IN indicator does not glow this indicates that power is not being supplied - check the connections for the AC adaptor...

  • Page 122: Installing The Battery Pack

    Power and Power-Up Modes 1.Battery lock 3.Battery pack 2.Battery release latch Releasing the battery pack Installing the battery pack To install a battery pack, follow the steps as detailed below: Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries.

  • Page 123: Password Utility

    Power and Power-Up Modes Password Utility The password utility allows you to maintain an additional level of security and provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from ® the Windows login password.

  • Page 124: Windows Utilities

    Power and Power-Up Modes 3. Press ENTER. If you enter the password incorrectly three times in a row, the computer shuts off. In this case, you must turn the computer back on to retry password entry. Power-up modes The computer has three different power-up modes as follows: ■...

  • Page 125: Chapter 7 Hw Setup

    HW Setup Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer, and provides information on settings for various functions. Accessing HW Setup To run the HW Setup program, click Start...

  • Page 126: User Password

    HW Setup Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password. Changes or remove the password. (default) Not Registered Selects the password. A dialogue box will appear Registered to allow you to set the password.

  • Page 127: Boot Priority

    HW Setup Display This tab lets you customize your computer’s display settings for either the internal display or an external monitor. Power On Display This tab allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available as part of the Windows Desktop properties.

  • Page 128: Boot Speed

    To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. when the TOSHIBA Leading Innovation >>> screen appears, release the F12 key. 2. Use the up and down cursor keys to select the boot device you want and press ENTER.

  • Page 129

    HW Setup Wake-up on LAN This feature lets the computer's power be turned on from shutdown when it receives a wake-up packet (Magic packet) from the LAN. Do not install or remove a memory module while Wake-up on LAN is enabled.

  • Page 130

    HW Setup SATA eSATA This feature allows you to set conditions for SATA. Enables the eSATA port. (Default) Enabled Disables the eSATA port in order to save power. Disabled SATA Interface setting This feature allows you to set SATA interface setting. Let HDD/SSD work with maximum performance.

  • Page 131: Troubleshooting

    Troubleshooting Chapter 8 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.

  • Page 132: Analyzing The Problem

    Troubleshooting ■ Make sure all optional accessories are configured properly in the computer's setup program and that all required driver software has been loaded (please refer to the documentation included with the optional accessories for further information on its installation and configuration).

  • Page 133: Hardware And System Checklist

    Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.

  • Page 134: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system according to how the Boot Priority option is set within the TOSHIBA HW Setup program. If any of the following conditions are present, the self test has failed: ■...

  • Page 135: Ac Power

    Troubleshooting It is recommended to leave the computer off until the interior reaches room temperature even though the DC IN indicator stops blinking. If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact your reseller, dealer or service provider.

  • Page 136

    Troubleshooting Problem Procedure Check whether the battery is hot or cold to the touch - if so, it will not charge properly and should be allowed to reach room temperature before you try again. Unplug the AC adaptor and remove the battery to make sure its connecting terminals are clean - if necessary wipe them with a soft dry cloth lightly dipped in alcohol.

  • Page 137: Real Time Clock

    1. Turn on the computer while pressing the F2 key. 2. Release the F2 key when the TOSHIBA Leading Innovation >>> screen appears - the BIOS setup application will load. 3. Set the date in the System Date field.

  • Page 138: Hard Disk Drive

    Alternatively you may wish to run the TOSHIBA PC Diagnostic Tool to check the general operation of the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

  • Page 139: Dvd Super Multi Drive

    Troubleshooting DVD Super Multi drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive’s disc tray is securely CD/DVD in the drive closed. Press gently until it clicks into place. Open the disc tray and make sure the CD/DVD is properly seated.

  • Page 140

    Troubleshooting Procedure Problem Open the disc tray and make sure the CD/DVD/BD is properly seated. It should lie flat with the label facing up. A foreign object in the disc tray could block laser light from reading the CD/DVD/BD. Make sure there is no obstruction.

  • Page 141

    Cannot write correctly If you have trouble in writing, make sure you have taken the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard while writing. Use only the software supplied with the computer for recording.

  • Page 142: Pointing Device

    Troubleshooting Pointing device If you are using a USB mouse, you should also refer to both the device section in this chapter, and the documentation supplied with your mouse. Touch Pad Problem Procedure The Touch Pad does Check the Device Select settings. not work.

  • Page 143: Usb Mouse

    Troubleshooting Problem Procedure The reaction of Touch Adjust the touch Sensitivity. pad is either too 1. Click Start Control Panel.Select Large sensitive or not icons or Small icons in View by, and then sensitive enough. click Mouse. 2. Within the Mouse Properties window, click the Device Settings tab..

  • Page 144: Usb Device

    USB, you are still able to use a USB mouse and/or USB keyboard by setting the Legacy USB Support option within the TOSHIBA HW Setup utility to Enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

  • Page 145: Esata Device

    Troubleshooting eSATA device In addition to the information in this section, please also refer to the documentation supplied with your eSATA device. Problem Procedure eSATA device does not Remove the eSATA device from the computer work and then reconnect it to a free port it in order to ensure it is firmly attached.

  • Page 146

    Troubleshooting Problem Procedure Annoying sound is In this instance you may be experiencing heard feedback from either the internal microphone or an external microphone connected to the computer - please refer to Sound System Chapter 4, Operating Basics for further information.

  • Page 147

    Troubleshooting Problem Procedure Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact your reseller, dealer or service provider. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.

  • Page 148: Toshiba Support

    - they are your best resource for current information and support. Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the location listed in the enclosed warranty booklet or visit on the Internet.

  • Page 149: Environmental Requirements

    Specifications Appendix A Specifications This appendix summarizes the computer’s technical specifications. Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% (noncondensing) Non-operating -20°C (-4°F) to 60°C (140°F) 10% to 90% (noncondensing) Wet-bulb 26°C maximum temperature Conditions Altitude (from sea level)

  • Page 150: Display Controller

    Display Controller and Video mode Appendix B Display Controller and Video mode Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. Due to the display panel's increased resolution, lines may appear broken in when displaying images in full-screen text mode.

  • Page 151: Card Specifications

    Wireless LAN Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor PCI Express Mini Card Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■...

  • Page 152

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN module may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.

  • Page 153

    Wireless LAN ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN module will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.

  • Page 154

    Wireless LAN Frequency Range 5150-5850 MHz Channel ID 5765* 5785* 5805* 5825* *1 Factory-set default channels *2 The channel which can be used depends on the installed wireless LAN module. And the approved channels on using are different at each country or region.

  • Page 155

    Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special interest Group. ■ When you use Bluetooth Adaptor from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth Adaptor from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz...

  • Page 156: Bluetooth Wireless Technology And Your Health

    Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

  • Page 157: Ac Power Cord And Connectors

    AC Power Cord and Connectors Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...

  • Page 158

    AC Power Cord and Connectors For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.

  • Page 159: Toshiba Pc Health Monitor

    Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from the HDD.

  • Page 160: Starting The Toshiba Pc Health Monitor

    & Acceptance screen. Please carefully read the information displayed. Selecting ACCEPT and clicking OK will enable the program. By enabling the TOSHIBA PC Health Monitor software, you agree with these terms and conditions and to the use and sharing of the collected information. Once...

  • Page 161: Legal Footnotes

    Legal Footnotes Appendix G Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are designed to accommodate all possible configurations for an entire product series. Therefore, please be aware that your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis.

  • Page 162: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 163: Copy Protection

    Legal Footnotes Hard Disk Drive (HDD) Capacity One Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity.

  • Page 164: If Your Computer Is Stolen

    What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.

  • Page 165: Toshiba Theft Registration

    Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Blumenstrasse 26 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite L650/ L655/L650D/L655D /...

  • Page 166

    Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current ACPI: Advanced Configuration and Power Interface AMT: Intel Active Management Technology ASCII: American Standard Code for Information Interchange BD-R: Blu-ray Disc Recordable BD-RE: Blu-ray Disc Rewritable BIOS: basic input/output system...

  • Page 167

    Glossary FDD: floppy diskette drive FIR: fast infrared GB: gigabyte HDD: hard disk drive HDMI: High-Definition Multimedia Interface IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte...

  • Page 168

    8-9 Dual Pointing Device Bluetooth 3-6, 4-27 Touch Pad 2-9, 4-1 Bluetooth Stack for Windows Touch Pad control buttons 4-1 by Toshiba 3-10 using 4-1 problems 8-18 DVD Super Multi drive Boot Priority 7-3 problems 8-9 Bridge media slot 2-4, 3-12...

  • Page 169

    Index Zoom 5-4 HW Setup FN + 1 (TOSHIBA Zooming Utility accessing 7-1 reduce) 5-4 Boot priority 7-3 FN + 2 (TOSHIBA Zooming Utility display 7-3 enlarge) 5-4 general 7-1 FN + ESC (Mute) 5-3 keyboard 7-4 FN + F1 (Lock) 5-3...

  • Page 170

    TOSHIBA Assist 3-10 Dual Pointing device 8-12 TOSHIBA Bulletin Board 3-11 DVD Super Multi drive 8-9 TOSHIBA ConfigFree 3-10 eSATA device 8-15 TOSHIBA Disc Creator 3-10, 4-17 External monitor 8-16 TOSHIBA DVD-RAM Utility 3-10 Hard disk drive 8-8 TOSHIBA HDD/SSD Hardware and...

  • Page 171

    Web Camera 2-8, 3-5, 4-3 Video mode B-1 Video RAM 3-2 Wireless communication 4-25 indicator 2-10, 4-28 Wireless LAN 3-6, 4-26 problems 8-17 USB device problems 8-14 Using WinDVD BD for TOSHIBA 4-20 Utilities and Applications 3-9 Downloaded from Manuals User’s Manual Index-4...

Comments to this Manuals

Symbols: 0
Latest comments: