Main Wiring Harness; Console Assembly - Life Fitness 97Ti Service Manual

Life Fitness Model 97Ti, 95Ti, 93T, 97Te, and 95Te Treadmills
How To... Replace the Main Wire Harness
Special Service Tools Required: NONE
1. Turn the unit power OFF at
the switch, and then unplug
the line cord at the wall
outlet.
2. Remove the Inside Upright
Covers, Front Cover, and
Motor Cover. See
To..." in this section.
3. Remove the
Assembly. See "How To..."
in this section.
4. Disconnect the Main Wiring
Harness from the
Controller, and then pull out
the Main Wiring Harness.
5. Install new Main
Harness through the top of
the Left Upright (Upright),
and connect to the Motor
Controller.
6. Reconnect to the Console Assembly.
7. Install Covers.
Main Wiring
Harness
"How
Console
Motor
Wiring
50
HR & Smart
Stop Cables