Table of Contents
Advertisement
Clearing the Program
•
When the memory in your Bee-Bot is full, no more commands can be entered.
•
Pressing the clear key <X> will clear the sequence memory.
Low power sleep mode
•
If your Bee-Bot is not used for 2 minutes, then it will play a sound and go to
sleep.
•
In sleep mode, very little power is consumed and the batteries will last a long
time.
•
Pressing any button in sleep mode, wakes the Bee-Bot up, plays a sound and
flashes the eyes.
Battery precautions
•
Bee-Bot is powered by a Lithium Polymer battery pack which is user
replaceable.
•
Non-rechargeable batteries are not to be recharged.
•
Rechargeable batteries are only to be charged under adult supervision.
•
Batteries are to be inserted with the correct polarity.
•
Exhausted batteries are to be removed from the Bee-Bot
•
The supply terminals are not to be short-circuited.
•
Regularly examine for damage the plug, enclosure and other parts. In the
event of any damage, the toy and charger must not be used until the damage
has been repaired.
Care and maintenance
•
If necessary, wipe the Bee-Bot gently with a clean damp cloth
•
Keep the Bee-Bot away from direct sunlight and heat.
•
Do not allow the Bee-Bot to come into contact with water or other liquids. If
painting or gluing on the additional shells, ensure the shells are dry before
clipping to your Bee-Bot.
•
In the event of static, your Bee-Bot may malfunction. In this case, please
switch it off and then back on again to reset it.
Primary ICT Ltd - www.primaryict.co.uk
5
Hide quick links:
Advertisement
Table of Contents
