10 Camera; Camera Tips; Take A Picture; Camera Setting Options - Kyocera G2GO M2000 User Manual

Hide thumbs Also See for G2GO M2000:
Table of Contents

Advertisement

10 Camera

Camera Tips

Your phone has a camera. Before using your
phone's camera, here are some tips:
• You cannot activate the camera while on an
active call or while browsing files in the
media gallery.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a "Low memory" error, check
your resolution and quality compression
settings.
• If there is no activity within 45 seconds
after you turn your camera on, the camera
times out and returns to the previous launch
point.
• Menu settings and options can only be
accessed when the camera is active.
• Numbers in the top right corner indicate the
number of snapshots remaining before the
phone runs out of memory.

Take a Picture

1. To activate the camera, press and hold the
Camera key. You can also select Camera
from the main menu.
2. Focus on the image using the phone's
display as a viewfinder.
User Guide
3. To take a picture, press the OK key. The
picture is saved to Camera Pictures.
4. Select Send > Via Bluetooth (to send to a
Bluetooth-enabled device) or To Printer
(to print on a Bluetooth-enabled device).
Select Erase to delete the picture from your
phone.
5. Press the End key to exit camera mode.

Camera Setting Options

Adjust the Resolution
From camera mode, select Options > Settings
> Resolution and a size for your pictures.
Numbers in the bottom left corner indicate the
current resolution setting.
Set Self Timer
From camera mode, select Options > Settings
> Self Timer and a time.
The
icon indicates the timer is activated.
When you take a picture, a beep plays three
seconds from the time the shutter snaps the
picture.
53

Advertisement

Table of Contents
loading

Table of Contents