Integrity Enclosed Trailer Owner's Manual page 20

the other sidewall of the tire or the outward facing
sidewall of an asymmetrical tire that has a particular
side that must always face outward when mounted on
a vehicle.
Light truck (LT) tire: A tire designated by its
manufacturer as primarily intended for use on
lightweight trucks or multipurpose passenger
vehicles. May be used on trailers.
Load rating: The maximum load that a tire is rated to
carry for a given infl ation pressure.
Maximum load rating: The load rating for a tire at
the maximum permissible infl ation pressure for that
tire.
Maximum permissible infl ation pressure: The
maximum cold infl ation pressure to which a tire may
be infl ated.
Maximum loaded vehicle weight: The sum of curb
weight, accessory weight, vehicle capacity weight,
and production options weight.
Measuring rim: The rim on which a tire is fi tted for
physical dimension requirements.
Non-pneumatic rim: A mechanical device which,
when a non-pneumatic tire assembly incorporates
a wheel, supports the tire, and attaches, either
integrally or separably, to the wheel center member
and upon which the tire is attached.
Non-pneumatic spare tire assembly: A non-
pneumatic tire assembly intended for temporary use
in place of one of the pneumatic tires and rims that
are fi tted to a passenger car in compliance with the
requirements of this standard.
Non-pneumatic tire: A mechanical device which
transmits, either directly or through a wheel or wheel
center member, the vertical load and tractive forces
from the roadway to the vehicle, generates the
tractive forces that provide the directional control of
the vehicle and does not rely on the containment of
any gas or fl uid for providing those functions.
Non-pneumatic tire assembly: A non-pneumatic
tire, alone or in combination with a wheel or wheel
center member, which can be mounted on a vehicle.
Normal occupant weight: This means 68 kilograms
(150 lbs.) times the number of occupants specifi ed in
the second column of Table I of 49 CFR 571.110.
Tire Safety
Occupant distribution: The distribution of occupants
in a vehicle as specifi ed in the third column of Table I
of 49 CFR 571.110.
Open splice: Any parting at any junction of tread,
sidewall, or innerliner that extends to cord material.
Outer diameter: The overall diameter of an infl ated
new tire.
Overall width: The linear distance between the
exteriors of the sidewalls of an infl ated tire, including
elevations due to labeling, decorations, or protective
bands or ribs.
Pin Weight: The downward force applied to the 5th
wheel or gooseneck ball, by the trailer kingpin or
gooseneck coupler.
Ply: A layer of rubber-coated parallel cords.
Ply separation: A parting of rubber compound
between adjacent plies.
Pneumatic tire: A mechanical device made of rubber,
chemicals, fabric and steel or other materials, that,
when mounted on an automotive wheel, provides the
traction and contains the gas or fl uid that sustains the
load.
Production options weight: The combined weight
of those installed regular production options weighing
over 2.3 kilograms (5 lbs.) in excess of those standard
items which they replace, not previously considered in
curb weight or accessory weight, including heavy duty
brakes, ride levelers, roof rack, heavy duty battery,
and special trim.
Radial ply tire: A pneumatic tire in which the ply
cords that extend to the beads are laid at substantially
90 degrees to the centerline of the tread.
Recommended infl ation pressure: This is
the infl ation pressure provided by the vehicle
manufacturer on the Tire Information label and on the
Certifi cation / VIN tag.
Reinforced tire: A tire designed to operate at higher
loads and at higher infl ation pressures than the
corresponding standard tire.
Rim: A metal support for a tire or a tire and tube
assembly upon which the tire beads are seated.
20