Advertisement
Introduction to basic operation:
1. Smartphone + short Micro USB OTG cable + E18
Put function switch (15) in the PHONE IN position, connect smartphone (*Note
Supported Models) with E18 via the short Micro USB OTG cable (refer to below
connecting diagram 2), and turn on E18 by turning the volume knob.
Under normal connecting condition, the speaker on the phone would be muted when
playing music. Connect the headphone to the E18, and adjust to suitable volume to
enjoy high quality music.
With HID compliant player software on the smartphone, users can start and pause the
music, and switch to previous or next tracks using the corresponding buttons on the E18.
**With non-compliant player software it is normal if the buttons have no response.
(Note: Under some circumstances, the sound output on the phone may be muted after
the E18 is connected to the phone and you would hear no sound on the headphones
connected to the E18. In this case please try adjusting the volume on the smartphone
manually.)
2. Computer+ USB connecting cable+E18
*Important note: before attempting to connect the E18 to the computer, please ensure
that the function switch (15) is in the PC IN position and not the CHG OUT position.
Put function switch (15) in the PC IN position, and connect the computer with the E18
via the USB-micro USB connecting cable (refer to below connecting diagram 1). Turn
on the E18 by turning the volume knob.
Under normal conditions, for the first time the E18 is connected to a computer, the
computer would install the USB driver automatically, and display the device as
"FiiO USB DAC-E18"after it is detected. Select the E18 as the sound output device on
the computer (refer to below for examples), plug your headphones into the E18, and
adjust to suitable volume to enjoy high quality music. You can also further connect the
E18 to other audio DACs and amplifiers via the coaxial output and line out on the E18.
Selecting E18 as the sound output device:
In the audio player software (foobar2000 on windows as example)
Or select the E18 as the systemwide default output device (Mac OS as example)
Mac os:system preferences-Sound-Output select FiiO USB DAC-E18"
FiiO USB DAC-E18
"
USB
5
Advertisement
