Optional Accessories; Lithium Battery - Paul C. Buff Vagabond Mini Lithium Quick Start Manual

VAGABOND MINI™ LITHIUM Optional Accessories
These optional accessories are each sold separately - visit us online or contact
our Customer Service team to learn more.
The VMBAG Vagabond Mini™ Lithium Carrying Bag is a convenient, soft-side carrying
bag designed to carry your complete Vagabond Mini™ Lithium system (with the
stand clamp attached) along with a spare battery. Front and side pouches ad-
ditionally allow you to carry small items such as power and sync cords, remote
controls and a small power strip for powering more than two flash units.
The VM-UPC3-120V 3-foot Power Cord is a standard 120V power cord for use with
the VM120 system. This shorter cord is convenient when the system is clamped
to a light stand and less length is needed between the light and the system.
We offer a 230V International Power Cord for use with 220V AlienBees™ units or the
Einstein™ unit (in 230V mode) with the 230V Vagabond Mini™ Lithium system. The
international cords have Type I (Australia / China) plugs for use with the 230V
Type I sockets and are available in standard 15-foot and shorter 3-foot lengths.
Charging Your VAGABOND MINI™ LITHIUM Battery
1. Turn the Vagabond Mini™ Lithium system OFF and locate the supplied battery charger.
The supplied VMC3A Universal Rapid Charger (95-250VAC input) is used to charge the
Vagabond Mini™ Lithium battery. The charger has two components: (1) the black
encased charger with an attached Anderson connection cord and (2) the battery
charger's power cord with a standard two-prong male AC plug.
2. Plug the battery charger's power cord into the VMC3A charger. The power cord plugs
into the charger with its standard "figure eight" C7 appliance connector.
8