Table of Contents
Advertisement
PACKAGE CONTENTS
Your EW-700 comes with the following items in the box. Please locate all of the
following:
1.
The EW-700 Scooter
2.
36V Battery Charger
3.
Tool Kit
4.
Seat & Seat Post
5.
Front Wheel & Axle
6.
Trunk with Keys & mounting hardware
7.
Trunk Rack & mounting nuts/bolts
8.
Spare Fuse(s)
9.
Product Handbook
10. Footplate nuts/bolts & washers
11. 1 Handlebar clamp & 1 seat post/trunk rack clamp
12. Footpad Decals
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your EW-700
Fig. 1
Fig. 2
Fig. 3
Assembly
1. Carefully remove the EW-700 from the box.
2. Install the front wheel and axle. (Fig. 1)
3. Attach the T-handlebar to front fork/wheel
and tighten clamp securely at the base.
Insert both left and right handlebars by
inserting and then tightening the black bolt.
(Fig. 2)
4. Secure the footplate to the frame using the
4 enclosed footplate nuts, bolts and rubber
washers then apply footplate decals.
5. Insert the seat post and seat into the seat
post receiver, and then install the trunk rack
to the rear of the scooter. Tighten the seat
post clamp securely. (Fig. 3)
6. Optionally, attach the trunk to the trunk rack
using the enclosed trunk hardware.
Page7
Advertisement
Table of Contents
