Classenti CDP 2 Owner's Manual page 2

PRECAUTIONS
WARNING
Always follow the basic precaution listed below to avoid the possibility of serious injury or even death from electronic shock,
short-circuiting, fire or other hazards. These precautions include, but are not limited to, the followings:
l Do not open the instrument or attempt to disassemble
the internal parts or modify them in any way. The
instrument contains no user-serviceable parts. If it
should appear to be malfunctioning, discontinue use
immediately and have it inspected by qualified service
personnel.
l Do not expose the instrument to rain, use near water or
in damp or wet conditions, or place containers on it
containing liquids that might spill into any opening.
l If the power cord or plug becomes frayed or damaged,
or if there is a sudden loss of sound during use of the
instrument, or if any unusual smells or smoke appear to
be caused by it, immediately turn off the power,
disconnect the power plug from the outlet, and have the
CAUTION
Always follow the basic precaution listed below to avoid the possibility of physical injury or damage to the instrument or
other property. These precautions include, but are not limited to, the followings:
l Do not place the power cord near heat sources such as
heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it, or
place it in a position where anyone could walk on, trip
on, or roll anything over it.
l Do not connect the instrument to an electrical outlet
using a multiple-connector. Doing so can result in lower
sound quality, or possibly cause overheating in the
outlet.
l Unplug the power cords when not using the instrument,
or during electrical storms.
l When removing the power plug from the instrument or
an outlet, always hold the plug itself but not the cord.
l Do not expose the instrument to excessive dust or
vibrations, or extreme cold or heat, (such as direct
sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage
to the internal components.
l Before moving the instrument, remove all connected
power cords and other cables.
l When cleaning the instrument, use a soft, dry cloth.
Does not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths. Do not place
vinyl, plastic or rubber objects on the instrument, since
this might discolour the panel or keyboard.
l Before connecting the instrument to other electronic
components, turn off the power for all components.
Before turning the power on or off for all components,
set all volume levels to minimum. Also, be sure to set
PLEASE READ CAREFULLY BEFORE PROCEEDING
*Please keep these precautions in a safe place for future reference.
instrument inspected by qualified service personnel.
l Do not use a voltage other than the indicated power
supply voltage. Use of a voltage other than indicated
may cause fire or electrical shock.
l Before cleaning the instrument, always remove the
power plug from the outlet. Never insert or remove an
power plug with wet hands.
l Check the power plug periodically and remove any dirt
or dust, which may have accumulated on it.
the volume of all components at their minimum levels
and gradually raise the volume controls while playing
the instrument to set the desired listening level.
l Do not use the instrument near other electrical products
such as televisions, radios, or speakers, since this might
cause interference which can affect proper operation of
other products.
l Do not place the instrument in an unstable position
where it might accidentally fall over.
l Do not rest your weight on, or place heavy objects on
the instrument, and do not use excessive force on the
buttons, switches and connectors.
l Do not operate the instrument for a long period of time
at a high or uncomfortable volume level, since this can
cause permanent hearing loss. If you experience and
hearing loss or ringing in the ears, consult a physician.
l Avoid the LED/LCD subject to strong impact. It might
break the LED/LCD's glass and cause personal injury.
If the LCD glass crack or break, do not contact the
liquid inside the LCD, it might cause inflammation and
reddening. If the LCD liquids get in your eyes or skin,
immediately flush with water at least for 15 minutes
and then consult a doctor.
WE CANNOT BE HELD RESPONSIBLE FOR DAMAGE BY
IMPROPER USE OR MODIFICATIONS TO THE INSTRUMENT,
OR DATA THAT IS LOST OR DESTROYED.
2