Page 2
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING *Please keep these precautions in a safe place for future reference. WARNING Always follow the basic precaution listed below to avoid the possibility of serious injury or even death from electronic shock, short-circuiting, fire or other hazards. These precautions include, but are not limited to, the followings: l Do not open the instrument or attempt to disassemble instrument inspected by qualified service personnel.
INDEX (1) Overview (2) Assembly instructions (3) Main features (4) Play (basic play) (5) Pedal function (6) Play the demonstration songs (7) Practice songs (8) Tone control (9) Effect of tone (10) Function of double timbre (11) Metronome function (12) Selection of the function of touch sensitive (13) Record function (14) Transpose (15) MIDI...
ASSEMBLY INSTRUCTIONS ◆ Please check you have all parts and screws before assembling your piano...
Page 5
ASSEMBLY INSTRUCTIONS 1) Attach the horizontal pedal board to the two side boards (legs) ( 6) si de boar d( r i ght ) ( 5) si de boar d( l ef t ) ( 8) pedal boar d 2) Attach the back board to the pedal board (4 screws at the bottom and 2 screws at the top)
MAIN FEATURES 1. Switch On / off 2. Volume 3. Effect It is used to choose the REVERB effect, CHORUS effect, and metronome. 4. MIDI It serves two functions: one is to allow you transpose the piano into different keys; two is to allow you control over multiple MIDI functions (generated by a computer or external MIDI sequencer.
Terminal of pedal Please connect terminal of pedal with plug of jack. Terminal of MIDI. Please refer to function of MIDI Terminal of AUX input Terminal of the same of rhythm Switch of piano body main volume can’t adjust the volume, so connected equipment that should adjust equipment with volume.
2. Adjust volume Adjust moderate volume with volume slider. VOLUM E 3. Play Choose instrument voice and play. Features of instruments are as shown. PEDAL FUNCTION 1. Soft pedal (left) When engaged, the keyboard volume is reduced slightly 2. Sostenuto pedal (middle) When engaged, the keyboard sustains any key to the left of middle C that is depressed before the pedal is engaged.
PLAY THE DEMONSTRATION SONGS 1. Start the demonstration play Holding press the VOICE button, and press the keyboard’s key to select demo songs.. 2. Select the song If you want to select other songs. Repeat last step. 3. Stop the play of demonstration songs Holding press the VOICE button, then press A-1(keyboard key),to stop playing demo songs.
28(E0) Fantasia-Impromptu 39(D1#) Reverie 50(D2) Impromptu in Gb 29(F0) Chanson De L’ Adieu 40(E1) Sonata #20 51(D2#) Waltz in Ab 30(F0#) Scherzo in Bbm 41(F1) Traumerei 52(E2) Sonata Pathetique, 2 , mvt. 31(G0) Military Polonaise 42(F1#) Pour Elise 53(F2) Golliwog’s Cake Walk 32(G0#) Prelude 7 # 43(G1)
Page 11
There are 5 types of chorus. 3. Effect of touch Hold down the EFFECT button and press the keyboard’s key(C3-E3), to select the touch soft, hard, and normal. FUNCTION OF DOUBLE TIMBRES Use this function; the piano can make two timbres at the same time. 1.
High----------------------------------------------------------------------------- right timbre Volume left timbre 9-1 8-2 7-3 6-4 5-5 4-6 3-7 2-8 1-9 Initial value METRONOME FUNCTION 1. Hold down the EFFECT button and press the keyboard’s key F0 start metronome 2. Hold down the EFFECT button and press the keyboard’s key(G0 and E1),select metronome. It is 6 kinds of metronome.
RECORDING FUNCTION The recording function can record the songs played and playback. It have two track. to record and play. 1. Record. A. Hold down the EFFECT button and press the keyboard’s key (A-1),to start record. track 1 a. Start the recording The recording will start when you play (press the keyboard, step the pedal).
Page 14
the keyboard’s key (B-1) ●Hold down the EFFECT button and press the keyboard’s key (D0),start playback track 2. The play stops after all the record is finished or holding press EFFECT button and press the keyboard’s key (D0) ●Hold down the EFFECT button and press the keyboard’s key (E0),start playback track 1 and 2. TRANSPOSE You can reduce or raise the tone directly without change the play through keyboard.
played.( if AUX OUT and OUTPUT interface of MIDI keyboard is connected with AUX IN interface of electron piano by using the big junction board, and make the speaker of digital piano sound together. ) ●To change the timbre of digital piano, timbre of connected equipments will be changed(when the power is on, process transmits sender and receiver signal, refer to 20 pages ) 2.
Holding press MIDI button and press the keyboard’s key (C0 and D1#), select receive track.receive track will be changed in 1-16. ● The power is on, however send or receive, track 1 is always displayed 2. Setting of local ON/OFF. Holding press MIDI button and press the keyboard’s key (C7), Setting of local ON/OFF.
Page 17
Piano sonata 11 A long tone KV331-the 3 chapter Piano 1 3:32 Piano 1 5:20 Piano the 14 #C short tone 27-2(moon light) 1 chapter Piano 1 6:10 Dream Piano 1 1:32 Piano sonata the 20 G long tone 49-2 the 1 chapter Piano 1 4:37...
Need help?
Do you have a question about the CDP 2 and is the answer not in the manual?
Questions and answers