Using The Monitor Arm - Vision Freedom Machine User Manual

Using the Monitor Arm

Resistance Adjust
Tilt Adjust
Weight Adjust
Swivel Adjust
Freedom Machine is ready to use out of the box. You do not need to
adjust any of the dials to use the machine.
* All dials turn clockwise. Make sure they are tightened down
before use.
Tilt Adjust - Use this dial to control the tilt angle of the monitor.
( Figure 1, Page 14)
Swivel Adjust - Place your hands on the monitor and swivel left and
right. ( Figure 2, Page 14)
Weight Adjust - If you purchased Freedom Machine base unit by
itself, use this set screw to calibrate weight capacity of the monitor.
Maximum weight capacity is 22 pounds. ( Figure 3, Page 14)
Resistance Adjust - After calibrating the weight capacity, use this dial
to set the resistance of how the monitor will move.
( Figure 3, Page 14)
13