Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for AMG Physio Logic
Summary of Contents for AMG Physio Logic
- Page 1 Automatic Wrist Blood Pressure Monitor Instruction Manual Features: • Step Valve Technology • Memory for up to 30 readings • One-Touch Operation • Easy-to-read Display • Time and Date Display 106-960...
-
Page 2: Table Of Contents
Table of Contents Step valve measuring technology ......3 Statement of accuracy ....... . . 3 About blood pressure . -
Page 3: Step Valve Measuring Technology
Step Valve Measuring Technology This Physio Logic™ monitor uses the oscillometric method to detect your blood pressure. Before the cuff starts inflating, the device will establish a baseline cuff pressure equivalent to the air pressure. Your Physio Logic™ monitor will determine the appropriate inflation level based on one’s pressure oscillations,... -
Page 4: Blood Pressure Standard
Blood Pressure Standard The Joint National Committee on prevention, detection, evalua- tion, and treatment of high blood pressure has developed a blood pressure standard, according to which areas of low and high risk blood pressure are identified. This standard is a guideline as blood pressure varies among different people and different age groups... -
Page 5: Before Taking A Measurement
Before Taking a Measurement To help you obtain more accurate readings: • Urinate if necessary. • Remove any clothing and jewellery from your left arm. Placing the cuff on anything other than bare skin can result in an inaccurate reading. •... -
Page 6: Name / Function Of Each Part
Name / Function of Each Part LCD display Wrist cuff Battery cover Recall key Add to memory key Time set key Start key Power key 2 “AAA” size, 1.5 V Alkaline batteries Carrying Case Please store your blood pressure monitor in the carrying case as shown below. -
Page 7: Display Explanation
Display Explanation Month Hour Date Minute mmHg Systolic pressure Memory mark Diastolic pressure Pumping mark Pulse rate Weak battery mark Appears when a Appears while inflating. measurement value is stored in memory or is Shows the pulse rate per recalled from memory. minute. -
Page 8: Recalling Memory
Recalling Memory 1. To recall stored blood pressure readings from memory, simply press the Recall key. mmHg The last set of memorized readings will be displayed. 2. Another press of the Recall key will recall the previous set of readings. Note: The data will be erased when any of the batteries are removed for at least 10 seconds Time Adjustment... -
Page 9: Applying The Arm Cuff
Applying the Arm Cuff 1. Remove all watches, jewellery, etc. Fig. A prior to attaching the wrist monitor. Clothing sleeves should be rolled up and the cuff should be wrapped on bare skin for correct measurements. Fig. B 2. Apply cuff to the left wrist with the palm facing up as in FigureA. -
Page 10: Taking A Measurement
Taking a Measurement 1. Wrap the cuff on the wrist. Press the POWER key. All digits will light up mmHg checking the display functions. This will take approximately 2 seconds. 2. After all the symbols appear, the display will show a “0”. The monitor is now ready to measure. -
Page 11: Troubleshooting
Troubleshooting Symptom: No display when the Power button is pressed. Correction: If the batteries have run down, replace them with new alkaline batteries. If the batteries are not in the correct position, re-insert them with the correct polarities. Symptom: mark shown on display or the blood pressure value is displayed excessively low (high). -
Page 12: Specifications
: 13.5 to 19.5 cm (5.3” to 7.7”) Minimum age : Over 18 years old * Specifications are subject to change without notice. Consumer Info-Line 1-800-363-2381 AMG MEDICAL INC. 8505 Dalton, Montreal, QC H4T 1V5 www.amgphysiologic.com www.amgmedical.com P/N 803-036 REV: 1.0 1201...
Need help?
Do you have a question about the Physio Logic and is the answer not in the manual?
Questions and answers