On The Machine; Symbols On The Machines - Gasoline 4500 Owner's Manual

2.WARNING LABELS ON THE MACHINE
（ （ （ （ 1） ） ） ） Carefully read owner's
manual before operating this
machine
（ （ （ （ 2） ） ） ） Wear head, eye and ear
protection
（ （ （ （ 3） ） ） ） Use the chain saw with two
hands; one handed operation of the
saw can be dangerous.
（ （ （ （ 4） ） ） ） Warning! Kickback it's dangerous
（ （ （ （ 5） ） ） ） Warning
The words WARNING calls attentions to
an act or a condition which can lead
to serous personal injury or death.
（ （ （ （ 6） ） ） ） Chain brake operation
(7)Do not expose to rain!
not operate the machine on wet
ground.
(8) Circle and slash symbol means
whatever shown is prohibited.
3.SYMBOLS ON THE MACHINE
For safe operation and
Do
cover of the unit.
START
maintenance, symbols are
carved in relief on the
machine. According to these
indications, please be careful
not to take a mistake.
(a). The port to refuel the
"MIXGASOLINE" Position:
fuel tank cap
(b).The port to refuel the
"CHAIN OIL"
Position： ： ： ： oil cap
(c).The indication regarding
the switch. Flipping the
engine switch to the
"O"(stop)direction, the
engine stop.
Position: rear-right of the
unit
（ （ （ （ d） ） ） ） The indication regarding
the choke. Pulling out
the choke knob, the choke
closes. Pushing in the choke
knob, the choke opens
Position: rear-right of the
unit
(e).The indication regarding
the chain oil adjuster nut."
MIN" DIRECTION-the oil
flow decrease "MIX"
direction-the oil flow increase
Position: starter case of the
unit
(f)The position of H-needle
the position of L-needle the
position of idle adjusting
screw Position: Cylinder
Engine Manual start
Position: Starter knob