Adjusting The Co Ee Lenght - Saeco Intuita HD8750 User Manual

Adjusting the co ee lenght

The machine allows you to adjust the amount of brewed espresso accor-
ding to your taste and the size of your cups.
Each time the " " button or "
a pre-set amount of co ee. Each button may be individually programmed
for a speci c brew setting.
The following procedure describes the programming of the "
1
Place a cup under the dispensing spout.
2
Press and hold the "
ash during this phase. Then release the button. The machine is now
programming.
The machine starts brewing co ee.
3
As soon as the desired amount of co ee in the cup is reached, press
the " " button again.
At this point the button "
the machine will brew the same amount of espresso that was just
programmed.
Note:
To program the " " co ee button, the same steps should be followed.
You should using the "
red amount of co ee is reached.
" button is pressed, the machine brews
" button. The " " button and the light "
" is programmed; each time it is pressed,
" button to stop brewing co ee when the desi-
ENGLISH
17
" button
"