Driver-Selectable Surround Sound (Dss) - If Equipped; Compass Display - Dodge 2014 Challenger SRT Owner's Manual

232 UNDERSTANDING YOUR INSTRUMENT PANEL
The round symbol in the middle rotates to point at the
new ignition switch position. If desired, the ignition
switch position graphic can be set to be constantly visible
by pressing the EVIC MENU button until the display
appears.
Refer to "Keyless Enter-N-Go™" in "Starting And Oper-
ating" for more information.
NOTE: Under certain conditions, the display may be
superseded by another display of higher priority. But
when the ignition switch position is changed, the display
always re-appears.
Driver-Selectable Surround Sound (DSS) – If
Equipped
Press and release the MENU button until "Surround
Sound" displays in the EVIC, then press and release the
SELECT button. The EVIC provides information on the
current surround mode.
• Stereo
• Surround Sound
While in the Surround Sound menu, press the SELECT
button to change surround modes.

Compass Display

MENU Button
The compass readings indicate the direction
the vehicle is facing. Press and release the
MENU button until "Compass" displays in the
EVIC.
NOTE: The system will display the last known outside
temperature when starting the vehicle and may need to
be driven several minutes before the updated tempera-
ture is displayed. Engine temperature can also affect the
displayed temperature; therefore, temperature readings
are not updated when the vehicle is not moving.