Basics; Powering On / Off; Powering On - MUTOH UniFixer 65 User Manual

Chapter 5
5.1

Powering ON / OFF

5.1.1

Powering ON

When connecting the machine to the power grid, make sure that:
Your machine's tension corresponds with the tension of you electrical network.

Note
Refer to the local regulations for more information concerning the electrical

connection norm and compatible plug.
Switch on the power switch located at the back of the machine.
Step 1:
Refer to
Press the reset button in order to activate all machine safety mechanisms.
Step 2:
Refer to
Set the temperature (215°C recommended) and speed to slow.
Step 3:
Wait until the Unifixer 65 reaches the requested temperature (215°C) before starting
Step 4:
to use the Unifixer 65. This takes about 35 min.
AP-75393 - Revision 1.1

Basics

Rear view on page 33
Operation panel on page 34
User's Guide Unifixer 65
Basics
37
5