seapro Standard Model Instruction Manual And Warranty page 17

CAL. VD54 (with date - VD53)
Chronograph Stopwatch
(1 crown/2 pushers)
MINUTE HAND
SECOND HAND
Time Setting
1. Pull crown out to position 2.
2. Set the time by turning the crown.
3. Push the crown back to position 1.
24-Hour Sub-Dial Setting
The 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to check that the 24-hour hand is
set properly.
Using the Stopwatch
Check the stopwatch minute and second hands to see if they are in the \ 230" position. If not, follow the stopwatch hand adjustment instructions.
Pressing A stops and starts the stopwatch. Pressing B controls the split time and resets.
Stopwatch Hand Adjustment
1. Pull crown out to the position 2.
2. Press A or B at the same time to reset the stopwatch minute and second hands to the "0" position.
3. With each press of A or B (A= forward, B= back), the hands move once clockwise or counter-clockwise. The hands move quickly if the
pushers are kept pressed.
NOTE: If the stopwatch hands move improperly, pull crown out and press A and B at the same time for over 2 seconds. When the pushers
are released, the stop-watch second hand will turn counter-clockwise and return to original position.
4. Push crown back to position 1.
A
24-HOUR HAND
B
13