Sangean WR-11 Instruction Manual page 3

Power your radio
AC operation
Before you plug the AC cord into the radio , be sure the AC voltage is
correct . Insert the plug on the end of the supplied power cord into the AC
power socket on the back of the radio .
DC operation
For outdoors use , you can power the radio by using 12V DC input socket
from a DC power supply ( example , from the power supply of vehicles or
boats ) . An AC power adaptor with 1 Ampere and center positive in
polarity can also power the radio in house .
Operating your radio FM
1. Connect the Antenna
The radio comes with built-in AM/FM antenna . To improve FM
reception , insert the end of the supplied FM wire antenna into the F-type
antenna terminal and adjust the wire for best reception . A 75 ohm coaxial
Cable of outdoor antenna may also be attached to the terminal . Be sure to
switch external/internal antenna switch to external position while using
the supplied wire antenna or connect the outdoor antenna . In some of the
European countries , you may have to connect the supplied antenna
terminal adaptor to connect with the outdoor antenna .
2. Turn on your radio by switching the Power knob to FM position.
3. Rotate the Tuning Control to select the desired station . On FM , the
tuning scale is marked in MHz (Megahertz) . The tuning LED indicator
will appear brightest when best tuning has been achieved .
4. Adjust the Volume Control for comfortable listening .
5. To switch off the radio , turn the Power knob to OFF position .
Operating your radio AM
1. Connecting the antenna
The radio comes with built-in AM antenna which should be enough for
normal listening . To improve the AM reception , you may connect the