Advertisement

Quick Links

EYEZONE P070S-6
User Manual
O c t 0 7 , 0 9
3 4 5 3 4 0 0
FCC Notices
It's herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential installation. This equipment generated uses and can radiate radio frequency
energy and if not installed and used in accordance with the instruction manual may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio of television reception, which can be determined by turning the
equipment off or on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
CE Declaration
This device complies with CE class B.
*EN55013
EN61000-3-2
EN61000-3-3
EN55020
Printed in Taiwan R.O.C.
All contents are subject to change without notice.
All trademarks are the property of their respective owner.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P070S-6 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EYEZONE P070S-6

  • Page 1 FCC Notices It’s herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is EYEZONE P070S-6 subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may User Manual cause undesired operation.
  • Page 2: Package Contents

    2. INTRODUCTION 7.2 Photo Setup…………….…………………………………… 7.3 Firmware Setup…………………………………………….. FJ Display is pleased to introduce the ultra-slim 7 inch digital signage, P070S-6. The P070S-6 8. Using the P070S-6..………………………..…………………... 10 features USB Auto-Copy function, Timer function, Programmed Play and One File Repeat 8.1 USB Auto-Copy Function………….……………………….
  • Page 3 4. HARDWARE OVERVIEW 5. REMOTE CONTROL Power on/ off Mute sound Open the setup menu Memory card selection Open the timer setup window Volume up/ down Move the cursor Confirm the selection/ entry Go to the previous/ next page or image List all the pictures.
  • Page 4 Status After Power On Status 1: If the “Auto Start (ALL, Photo + Music, One File Repeat or Programmed Play)” function is enabled and there are media files on the memory card, the P070S-6 will auto play media files after power on.
  • Page 5: Photo Setup

    7.2 PHOTO SETUP Auto Start: Enable/ disable the auto play function after power on. OFF: Disable the auto start function Slideshow Mode: Enable/ disable the slideshow function. ALL: Play all media files on the memory card after power on. Photo + Music: Play the pictures with music. One File Repeat: Repeat only the selected file.
  • Page 6 Step2: Put the files that you want to copy and the file “AUTOCOPY.ini” to the USB pen driver. NOTE: 1. If the file “AUTOCOPY.ini” is not on Pen Driver, the P070S-6 will not execute the Auto-Copy function. 2. Please confirm there are no “Folder”, “Hidden File” and “System File” on the USB pen driver and CF card.
  • Page 7 NOTE: Use the ▲ or ▼ button to select the “Clear” item, and press the “ENTER” button to clear the Programmed Play list (all the play lists will be deleted). Step3: Restart the P070S-6 after setting, and the P070S-6 will execute the One File Repeat function. Step4: After finish setting, press the button to back to file list screen and restart the P070S-6.
  • Page 8: Troubleshooting

    9. TROUBLESHOOTING Situation Check Point Check power cable and power switches. No Picture Make sure the file format on the memory card is correct. Ensure that the battery (CR1220 3v lithium battery) in the remote No Response From control and it is inserted the correctly. the Remote Control Check for any barrier between the remote control and the product.

Table of Contents