Audio Control DQDX User Manual page 3

On the chassis, change Signal Delay Mode back to Normal.
Set the equalization controls for the front, rear, and subwoofer channels.
While your ears are a good reference point, we recommend using an audio
analyzer whenever possible. To engage the pink noise output of the DQDX for
help setting up the equalizer, press and hold the ACR-3 remote knob down for
about four seconds. This will switch the outputs of the DQDX from music to
Pink Noise. When you are done setting up the Equalizer you can just press and
hold the remote again for 4 seconds and it will turn the Pink Noise output off.
Sit back and enjoy the sound
If you have made it to this point and you don't have any questions, then
"Congratulations"! With that said we certainly encourage you to set aside
some time to grab a beverage or two and read through this entire manual, since
there is a tremendous amount of useful information. Plus we took the time to
write it so it would make us feel a whole lot better.
We now interrupt your reading of this manual to highlight a very important
feature of all AudioControl Autosound products...
Our Bulletproof Warranty
AudioControl Autosound products are designed and assembled at our factory
in the Pacific Northwest, just outside of a little town called Seattle, Washing-
ton. By nature, our products are rather sophisticated so we spend a good deal of
time training our dealers and their installation team. We do this so you will get
the best possible results from your AudioControl components.
To reinforce this point, if you have an Authorized AudioControl dealer install
your DQDX, we will extend the normal one-year warranty to a full FIVE years
parts and labor. Complete details of this warranty are listed at the end of this
manual and on our website at www.audiocontrol.com.
We now return you to your regularly
scheduled reading.
page 3