Mitsubishi Electric MS-18NN Series Service Manual page 31

OPERATING PROCEDURE
3. Removing the indoor fan motor and the line flow fan
(1) Remove the front panel.
(2) Remove the electrical box.
(3) Unhook the catch on the both sides of the nozzle assem-
bly.
(4) Remove the nozzle assembly.
(5) Remove the screws of the bearing support.
(6) Remove the screw of the heat exchanger unhook the
catch.
(7) Lifting the heat exchanger, remove the bearing support.
(8) Remove the motor support.
(9) Loose the screw fixing the line flow fan, remove the line
flow fan.
(10) Remove the screws of the side cover, remove the fan
motor.
PHOTOS
Photo 3
Catch
Heat exchanger
screw
Bearing support
screws
Photo 4
Line flow fan
Heat exchanger
Indoor fan motor
Fan
motor
screws
Motor band
31