Subscribe to Our Youtube Channel
Related Manuals for Reach CM400
Summary of Contents for Reach CM400
- Page 1 REACH MRS Server CM400 User Manual V1.5 2012-01 Copyright© Shenzhen Reach IT Co., Ltd.
- Page 2 Copyright© Shenzhen Reach IT Co., Ltd. 2011. All rights reserved. Any part of this document, including the text, image and graph, is the property of Shenzhen Reach IT Co., Ltd. No part of this document shall be copied in any means without the prior written consent of Shenzhen Reach IT Co., Ltd.
- Page 3 This manual is subject to update from time to time without prior notice. If you come across any problem that cannot be solved according to the manual, please contact our company for solutions. Thank you. Copyright© Shenzhen Reach IT Co., Ltd. 3 / 43...
-
Page 4: Table Of Contents
3.5 I DSS-ENC 1200 ............16 NITIAL CONFIGURATION OF 4 CONFIGURATION GUIDE OF THE SERVER ............17 4.1 S : .................. 17 YSTEM LOGIN INTERFACE Copyright© Shenzhen Reach IT Co., Ltd. 4 / 43... - Page 5 4.6.5 Users ......................33 4.6.6 Log ........................ 35 4.6.7 Finished Recording ..................35 4.6.8 Other ......................36 4.7 LCD O ..................37 PERATION UIDE Copyright© Shenzhen Reach IT Co., Ltd. 5 / 43...
- Page 6 4.8.1 Operator operation interface ................. 38 4.8.2 Common user operation interface..............38 4.8.3 Guest operation interface ................39 4.8.4 Plug-in (RecPlayer) brief instruction ............. 40 Copyright© Shenzhen Reach IT Co., Ltd. 6 / 43...
-
Page 7: Overview
Reach Multimedia Recording & Streaming System—is a new generation of multimedia recording and streaming system developed by Shenzhen Reach IT Co., Ltd. It is an IP-based system which can do the recording, live streaming and playing on demand of the video, audio and computer screen content through network simultaneously. -
Page 8: Application Diagram
REACH MRS100 User Manual 1.2 Application Diagram Copyright© Shenzhen Reach IT Co., Ltd. 8 / 43... -
Page 9: Hardware Installation
WAN interface. Insert the power cable into the Power connector on the rear panel of the server unit and insert the Power cable into the power source socket. Connect LAN cable to LAN port on the rear panel of the server unit. Copyright© Shenzhen Reach IT Co., Ltd. 9 / 43... -
Page 10: Av Encoder (Dss-Enc-110)
The above figure shows all ports and connection methods of the coder. Ports are selectively to be connected based on requirements while installation (but Power, LAN, VIDEO IN, AUDIO IN must be connected). 2.3 VGA Encoder (DSS-ENC-120) Copyright© Shenzhen Reach IT Co., Ltd. 10 / 43... -
Page 11: Hd Encoder(Dss-Enc-1200)
DVI-I input interface for HD video or VGA signal, HD-SDI input interface, 15 pins D-SUB VGA output interface, MIC input interface and tow-channel stereo for audio, two-channel stereo output and RS232 interface. Copyright© Shenzhen Reach IT Co., Ltd. 11 / 43... -
Page 12: Environment For Software And Hardware Installation
Choose the device you want to search for and then click search button Find the devices and their IP address at the devices list table. Notice: The PC that runs DSSIpViewer must be at the same physical network Copyright© Shenzhen Reach IT Co., Ltd. 12 / 43... -
Page 13: Ip Configuration Of Server
Check connection. Go to your PC Start ->Run->cmd, input Ping 192.168.3.92. If you get the replays, means the connection is ok. If not, please check the cable connection and PC’s IP. Copyright© Shenzhen Reach IT Co., Ltd. 13 / 43... -
Page 14: Initial Configuration Of Dss-Enc 120
The default IP address of ENC 120 from factory is random and you can see the IP address on the LCD of font panel (assume IP is 192.168.3.77 sub mask 255.255.255.0 and gateway 192.168.3.1. Set your PC’s IP Copyright© Shenzhen Reach IT Co., Ltd. 14 / 43... - Page 15 Input User: admin and Password: admin, click “Login”. Click type “System Settings” “Network Settings” 192.168.1.102, sub mask:255.255.255.0, gateway 192.168.1.1, then click “OK” Click “Save” in the navigation bar on life hand side. Click the button “Save Settings” Copyright© Shenzhen Reach IT Co., Ltd. 15 / 43...
-
Page 16: Initial Configuration Of Dss-Enc 1200
PC’s IP. Run IE, type in 192.168.4.57 and press “Enter”, then you can see the log in interface; Input User: admin and Password: admin, click “Login”. Copyright© Shenzhen Reach IT Co., Ltd. 16 / 43... -
Page 17: Configuration Guide Of The Server
2. Only one administrator and operator can login into the system at the same time. The same guest username and normal username can be used by multi users simultaneously. After logged on, the following page will appear Copyright© Shenzhen Reach IT Co., Ltd. 17 / 43... -
Page 18: Search And Change Ip Address Of The Server
LAN Interface: The network configured information of the LAN port, includes IP address, mask and the gateway. Note: if the cable is disconnected the IP address box will display as 0.0.0.0. WAN Interface: The network configured information of the WAN port, includes IP address, mask Copyright© Shenzhen Reach IT Co., Ltd. 18 / 43... -
Page 19: Search Option
Both the username and password are needed to enter the configuration interface. After you pass the authentication, navigate to System Maintenance page and change the IP address, mask and gateway, then click Save button. The system will reset automatically. Copyright© Shenzhen Reach IT Co., Ltd. 19 / 43... -
Page 20: Logout/Re-Login
Receive live streaming and play on demand with PC, you need to install ActviverX from first. Go to live streaming and VOD page, you will see a pop-out from the IE browser. Copyright© Shenzhen Reach IT Co., Ltd. 20 / 43... -
Page 21: Plug-In Instruction
REACH MRS100 User Manual Click Install to install the plug-in: Or click [Download Plug-in] to download and install. 4.4.2 Plug-in Instruction Click [Plug-in Instruction], you will see this page: Copyright© Shenzhen Reach IT Co., Ltd. 21 / 43... -
Page 22: 3Rd-Party Plug-In
REACH MRS100 User Manual 4.4.3 3rd-party Plug-in Click [3 Party Plug-in], you will see this page: 4.4.4 System information After logging in the system successfully, the system information is displayed: Copyright© Shenzhen Reach IT Co., Ltd. 22 / 43... -
Page 23: Start
Work information. 4.5 Start 4.5.1 Encoder Management Click [Start] -> [Encoder-Management] -> Add Encoder Copyright© Shenzhen Reach IT Co., Ltd. 23 / 43... -
Page 24: Meeting Room
Note: The system only capture audio signal from [Encoder1]. If there is no audio signal input to [Encoder1], the streaming and files recorded are without sound. [Reconnect]: Set reconnect times of connection between server and encoders (set times/unlimited times/disable) Copyright© Shenzhen Reach IT Co., Ltd. 24 / 43... - Page 25 Click [In Use] after connect the meeting room. View the meeting rooms already connected. [Disconnect]: Disconnect this meeting room; [Preview]: Pop-out RecPlayer and preview the signals (need install RecPlayer first) [Detail]: View and modify settings of encoders: Copyright© Shenzhen Reach IT Co., Ltd. 25 / 43...
- Page 26 [Record]: Start recording task as default settings and view recording task information. (The file will be named follow the meeting room name and current time, need to stop recording manually.) Note: Recording task can be paused/continue, stop, after started. [Advanced]: Set recording task parameter manually: Copyright© Shenzhen Reach IT Co., Ltd. 26 / 43...
- Page 27 (Clients receive live streaming with PC and HD Decoder need to turn on this function; PC need install RecPlayer first.); Multicast Control: Set multicast IP address, port and content for streaming; Turn on or turn off multicast. (PC need install RecPlayer first.) Copyright© Shenzhen Reach IT Co., Ltd. 27 / 43...
-
Page 28: Filelist
Reset: Zero clearing for VOD times; VOD: Play on demand recorded files; Download: Download files to the client’s local PC; Modify: Modify file name, file type, and remark information; Delete: Delete selected files. Copyright© Shenzhen Reach IT Co., Ltd. 28 / 43... -
Page 29: Classfied
Click [Filelist] -> [Classified] -> Add New Type: Input Type Name and Remark, click Save to add a new file type: [Modify]: Modify type name, remark, and add/delete file under this type; [Delete]: Delete type. 4.6 Configuration Copyright© Shenzhen Reach IT Co., Ltd. 29 / 43... -
Page 30: Time Sync/Reboot
[Synchronize]: To synchronize the server time and time on client’s PC; [Restart Server]: To remotely restart server (the system will automatically stop the recording if there is on-going recording task). 4.6.2 System Set Click [Configuration] -> [System Set]: Copyright© Shenzhen Reach IT Co., Ltd. 30 / 43... -
Page 31: Notice
Enter the title and content of the notice in the above dialog box and then click [Save] button. The non-administrator user will find the latest announcement title after re-log on the system or refresh the page and lick the title can view the detailed notice. Copyright© Shenzhen Reach IT Co., Ltd. 31 / 43... -
Page 32: User Groups
Click Group Name / Type, user group list can be ordered according to Group Name / Type. [Modify]: To modify information for added group. Click [Modify] button: Copyright© Shenzhen Reach IT Co., Ltd. 32 / 43... -
Page 33: Users
[Authority]: Set VOD and downloaded files for this group. Click [Authority] button, the following figure will appear: Only common user group has this function 4.6.5 Users Click [Configuration] -> [Users] -> Add new user: Copyright© Shenzhen Reach IT Co., Ltd. 33 / 43... - Page 34 The following figure will appear: Click user name / group / type, the users list can be ordered according to user name / group / type. [Modify]: Modify information for added group; Copyright© Shenzhen Reach IT Co., Ltd. 34 / 43...
-
Page 35: Log
4.6.7 Finished Recording Click [Configuration] -> [Finished Recording], Logs information for recording task can be reviewed and inquired according to File Name and Recording Status. Copyright© Shenzhen Reach IT Co., Ltd. 35 / 43... -
Page 36: Other
Users can register by themselves by clicking [Register] and then log on the system with registered account and password. [Download/Restore (Database)]: Export current system data and save them on local hardware or import backup data to recover system data. Copyright© Shenzhen Reach IT Co., Ltd. 36 / 43... -
Page 37: Lcd Operation Guide
2. Unicast…: Start unicast operation of the server; if the server has started unicast, it will display “Stop Unicast”; 3. Broadcast: Start broadcast operation of the server; if the server has started broadcast, then it will Copyright© Shenzhen Reach IT Co., Ltd. 37 / 43... -
Page 38: Nonadministrator User Guide
Unicast function will be available only after downloading and installing the plug-in program! Please click the “plug-in instruction” button and refer to the plug-in use instruction document on the IE page for detailed use instruction.) Click “Multicast/Unicast” view authorized multicast unicast list below: Copyright© Shenzhen Reach IT Co., Ltd. 38 / 43... -
Page 39: Guest Operation Interface
(Note: Receive live streaming function is available only when the plug-in program is downloaded and installed. For detailed instruction, please refer to the plug-in use instruction on the IE page. Click the “Plug-in Instruction” button on the page. ) Copyright© Shenzhen Reach IT Co., Ltd. 39 / 43... -
Page 40: Plug-In (Recplayer) Brief Instruction
The display layout set in the system plug-in program setting options. Select the item “Option” in the menu “Tool” on the player, and set relevant values in the pop-up dialogue box as shown in the following figure: Copyright© Shenzhen Reach IT Co., Ltd. 40 / 43... - Page 41 REACH MRS100 User Manual Normal: Big Video: Copyright© Shenzhen Reach IT Co., Ltd. 41 / 43...
- Page 42 REACH MRS100 User Manual Disable AGP accelerate: This option can be enabled when two window images are overlapping on some computers that are receiving live streaming; c. Program language selection Copyright© Shenzhen Reach IT Co., Ltd. 42 / 43...
- Page 43 “Language” in the “Tool” menu in RecPlayer, and select “Simplified Chinese” or “English” in the sub menu. Thank you for purchasing Reach products. If you find the appearance or function of the actual product differs from that in this manual due to different models or software and hardware upgrade, please do not hesitate to contact us (7*24-hour customer service hotline at 400-716-0868).
Need help?
Do you have a question about the CM400 and is the answer not in the manual?
Questions and answers