Page 2
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PER-FORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOUR-SELF. REFER SERVICING TO QUALIFIED PERSONNEL. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
Page 3
The laser product label has not been attached to products for U.S.A. and Canada. Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instructions handy for future reference. Safety 1.Power source :Connect the unit to a power source of the type described in these instructions or as marked on the unit.
Scart Cable Composite Video Amplifi er Remote control Audio Cable Connecting your KiSS DP-500 DVD player to your TV can be done with any of the cables below. (Only one cable can be connected at a time). 1. RGB via SCART 2.
Page 6
PC to DVD connection Below is an example of a connection for your DP-500 to a PC via an Ethernet Switch, to enable use of all its features and programmes. Extra information regarding cabling and connecting can be obtained by your local electronics´ supplier.
Quick Setup If your DVD Player is correctly connected (see the chapter on cable connections), a menu will appear when you turn on the DVD Player. The menu installs the most important settings for your TV set and language. Note: If this menu does not appear when you start the DVD Player, recheck the cable connections.
Page 8
Note: Your KiSS PC-Link software will ONLY work if the KiSS DP-500 is provided with a valid IP address. You can always go back and start over if you happen to do something wrong, or if you wish to enter the Setup menu and edit it.
You can always access the Setup menu and adjust the DP-500 to your specific requirements and hardware. When DP-500 appears on the main screen, press the SETUP button on your remote control, and a menu will appear with the available options. The orange frame shows your position on the menu. Use the arrow buttons to move the frame and select by pressing the ENTER button.
Page 10
The light in the DVD Player’s display can be modified from dim to normal or bright. All settings can be reset in the “Restore settings” menu, and the Quick setup can be re-initiated from the last menu.
Playing Media The DVD Player supports the following media: DVD Video, DivX, XviD, ISO MPEG-4, VCD, SVCD, Audio CD, MP3, Ogg Vorbis and JPG. DVD Menu If you have adjusted your DVD Player according to the instructions above, you can now insert a DVD into your DVD Player.
SETUP If the DVD Player is in the process of showing a film or playing music, press the (SETUP) button to see the available options on the disk. For instance, if you are watching a DVD film, the left-hand side of the screen will show information about the film’s length, the...
Setting up your connection To use the KiSS WebRadio service, you will have to connect your DVD player DP-500 to the Internet (please refer to the “connection” part of the manual). When done turn on your DVD player - press the “menu”...
Page 14
ID – The player ID is a 12-digit number, you can fi nd it by turning on your DVD player DP-500, then press the “Menu” button and the number will be displayed in the top of the screen. Type this number into the provided fi...
KiSS PC-Link enables you to connect your computer to your DVD player through the KiSS PC-Link software. You can therefore play, watch or listen to your PC files on your TV via the KiSS DP-500. Note: Clicking the search function will help your computer to find your multimedia files...
Page 16
Direct access to the picture fi les located on your PC. These can be selected or dragged and dropped. You can also tidy them into a folder from the KISS PC-link window. KiSS PC-Link Pictures Panel KiSS PC-Link Video Panel Drag and drop or select a movie fi...
If you do not have Internet access, or do not own or have access to a CD burner, an update can be purchased from the dealer where you purchased your DVD Player. To reset the settings of the DP-500, press the following buttons on the remote control: “Open”, “Clear”, “1”, “2”, “3” KiSS Technology A/S reserves the right to change all settings and specifications without notice.
Page 18
This warranty applies to every legal owner of the product during the warranty period. All contacts with KiSS Support should be addressed in English Information we must receive before repairing the product: Model name: KiSS DVD Player DP-500 Serial no.: RMA no.: Copy of the invoice or sales receipt The dealer’s name, address and phone no.
Need help?
Do you have a question about the DP-500 and is the answer not in the manual?
Questions and answers