Step 2: Register An Account; Fill In The Correct Information - Perma iCamera+ Instruction Manual

Ø Before connecting, please check that your product is
complete with accessories and a 5V power supply.
Ø Make sure you have a network with access to the Internet.
Connect camera and router with network cable, then
Ø
power the camera, camera will calibrate then go back to
center.
Ø Network status indicator will flash, if status indicator turns
blue, it means the device has automatically connected to
the Internet.
Step2:
Before viewing you need to register an account.
If you have a registered account, you can skip to the Step 3.
Click 'Register Camera' button in Figure 2, the setup window will
pop-up, Figure 3.

Fill in the correct information:

Ø SN/EID/Device Number and VCODE: located on the
bottom of the camera (please input the right info, or
registration will fail). For ease of setup press the 'Scan QR
Code' button, this uses your phone camera to scan the QR
Figure 2 Figure 3